Distance from Adjustment Holes to End of Demco 5-Position Adjustable Channel Bracket # DM13867-52

Question

Question:

What is the length from the adjustable part with holes to the end of the tongue channel? Inside length?

asked by: TJ

0

Expert Reply:

From the center of the holes on the vertical adjustment bracket of the Demco part # DM13867-52 to the end of the channel on opposite end measures 11-1/2 inches.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

Hi Tony, thanks for writing in and yes, we can 100% get your 2023 Jeep Wrangler set up to be flat towed behind your Holiday Rambler motorhome. To make it easy to order I'll go ahead and list everything out for you. - Base Plate Kit: Roadmaster…

view full answer...

Answer 5

To flat tow your 2024 Jeep Wrangler Unlimited you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item #RM-520 and item #RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Answer 6

I can definitely see how the specs can be a bit confusing. That said, I can say with 100% certainty that this will still work perfectly for you. The 42 pound per bike capacity you are seeing for the Kuat Piston Pro X #KU98VR is ONLY when installed…

view full answer...

Answer 7

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 8

Hi Tony, we can get you all that you are looking for, no problem. First, for the valve extender you can get one for whatever length you need, the TireMinder Valve Extender - 4" #TM37SR, 3" #TM79SR, or 2" #TM57SR. And you can use your…

view full answer...

Answer 9

From the center of the holes on the vertical adjustment bracket of the Demco part #DM13867-52 to the end of the channel on opposite end measures 11-1/2 inches.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow…

view full answer...