Review of MAXXAIR RV Vents and Fans - RV, Trailer Roof Vent Cover With EZClip - MA26JR Video

I spoke with my contact at MaxxAir regarding the MaxxAir 2 Vent Covers like the Smoke #MA00-933073 that you were looking at and the Standard Covers like #MA00-933067. He said there are two primary differences between the two models. The first is that…

to my knowledge there isn't a different generation of the MaxxAir II Covers since it is the second gen for the MaxxAir FanMate. The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA26JR is 22" long x 17-12" wide x 9-3/4" tall…

RV roof vent covers throughout the industry max out at 10-1/4" tall so you'd be limited to this height. Manufacturers know that this won't allow for the vent lid to fully open but have stated that as long as the lid is opened at least…

The correct big screen for the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part #MA10-20121.

No. The 117/112 is not the psi. It is the load index. The L is the speed rating of 75 mph. The load index is the rated load capacity for single and then dual tires on each side of the axle. 117=2833 lbs. The maximum psi should be listed on the tire…

The LaSalle Bristol Double Bowl RV Kitchen Sink #34413TLSB27167 has guard rails 3/4" in from each side of the sink and as such is designed to fit cutouts that are roughly 25-1/2" long x 14-1/2" wide. Since this is very close to your…

Sorry to hear about the broken handle! I went ahead and took a look at your Phoenix Faucets Hybrid RV Kitchen Faucet w/ Pull Out Spout #PF231441, and it appears that the handle is not offered as a replacement part, unfortunately. I know it's not…

Yes, the LaSalle Bristol Threaded Sink Drain part #34433JN1007 will work with the Better Bath Double Bowl RV Kitchen Sink part #LC385314 and it's what I recommend using.

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

You are correct that the MaxxFan Deluxe Roof Vent #MA00-07500K fits a standard 14 x 14-inch RV roof opening. The actual mounting flange measures 16-1/2 x 16-1/2. The overall dimensions for the vent are 22-1/2 long x 16-1/2 wide x 5-inches tall. You…

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

I did some checking and for your MaxxFan 4900K vent the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA26JR that you referenced is a confirmed fit.