Dimensions of MaxxFan Deluxe Roof Vent MA00-07500K

Question

Question:

Hi I am interested to change my fantasticfan for the maxxair Need to know what is the the foot print on the roof since I have my Ac that is pretty close? I know the fan hole is the same 14x14 but when it’s close wath is size MaxxAir MA00-07500K.

asked by: Karl M

0

Expert Reply:

You are correct that the MaxxFan Deluxe Roof Vent # MA00-07500K fits a standard 14 x 14-inch RV roof opening.

The actual mounting flange measures 16-1/2 x 16-1/2. The overall dimensions for the vent are 22-1/2 long x 16-1/2 wide x 5-inches tall. You may also care to refer to the two linked videos on this item.

expert reply by: Adam R

0

Answer 1

In regards tot he roof thickness, the MaxxFan Dome Plus vent does require a 1 inch thick roof at the minimum. So you would need to build up the roof of your camper where the vent installs to have at least 1 inch of thickness. In regards to the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes we have the Redarc In-Vehicle BCDC Battery Charger #RED96FR which essentially is the same thing as the charging system you referenced as it gives you a way to enhance the charging circuit ran to your 7-way to put the best charge on the trailer…

view full answer...

Answer 5

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 6

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 11

Hey Bruce, for a replacement Fan-Tastic brand RV roof vent I really like the part #FV803350 as it has a variable speed, reversible fan, a built in thermostat, power lid lift, and a rain sensor to auto close it in case it starts raining. The only…

view full answer...

Answer 12

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Dimensions of MaxxFan Deluxe Roof Vent MA00-07500K

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching