Are Any RV Roof Vent Covers Over 11" Tall

Question

Question:

Are there any vent covers over 11inch high?

asked by: Chris

0

Expert Reply:

RV roof vent covers throughout the industry max out at 10-1/4" tall so you'd be limited to this height. Manufacturers know that this won't allow for the vent lid to fully open but have stated that as long as the lid is opened at least 50% there will be no issues with performance. I recommend matching the cover to the brand of vent you have to make installation easier.

For MaxxAir I recommend the following:

Black # MA86JR
Smoke # MA26JR
White # MA76JR

For Dometic/Fan-Tastic Vent I recommend the following:

Black # FVU1500BL
White # FVU1500WH

expert reply by: Kevin C

0

Answer 1

Since you have a Fan-Tastic brand roof vent the cover you'd want is the part #FVU1500BL which was specifically designed for the vent that you have. This will allow the lid to open almost all the way up which will be enough to allow it to vent…

view full answer...

Answer 2

The MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR that you referenced is translucent. It would allow light to pass through it.

view full answer...

Answer 3

Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.

view full answer...

Answer 4

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 5

Yes, you are correct. All you need to wire in the MaxxFan Plus Roof Vent #MA00-04500K that you referenced is a power and ground rated for at least 5 amps and a 14 inch by 14 inch square hole cut in your roof.

view full answer...

Answer 6

For a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 7

Thanks for the pictures! The Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V.

view full answer...

Answer 8

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 9

I am afraid we are not able to tell specifically what model of FanTastic vent you have based on your pictures. It certainly appears to be an older model. If you are looking to replace individual parts of your fan we will need to know the exact…

view full answer...

Are Any RV Roof Vent Covers Over 11" Tall

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching