Troubleshooting Mounting Issues With A MaxxAir II RV Vent Cover

Question

Question:

Hello, I have the Maxx Air II vent cover on my 2019 Jayco Panicle Fifth wheel trailer. one of the vent covers broke in the middle. I ordered a replacement and the new one came in about 2 inches too narrow to fit in current easy clip brackets. The new brackets are shorter than the original and the actual cover is more narrow. Are there different ones to choose from. I didnt find any deltas to order from. Please help. MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Smoke Item # MA26JR

asked by: Keith C

0

Expert Reply:

to my knowledge there isn't a different generation of the MaxxAir II Covers since it is the second gen for the MaxxAir FanMate. The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA26JR is 22" long x 17-12" wide x 9-3/4" tall so I would just double check that you actually received this model and not something else. That being said you could also just remove the old brackets and install the new ones to get the cover to mount.

expert reply by: Kevin C

0

Broken MaxxAir II Cover
(click to enlarge)

Answer 1

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 2

The Ventline Vanair Trailer Roof Vent with 12V Fan #VP-543SP is not going to be completely rain proof (no roof top vent will be), because they need to be open somewhat, as you can see in the accompanying photo a customer sent in of this vent…

view full answer...

Answer 3

We actually have a few different version of the white rain covers from MaxxAir. The MaxxAir II #MA76JR that you referenced comes with the pins. This is for applications where the roof vent has the mounting tabs on one side. Since you have the 4…

view full answer...

Answer 4

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 5

Hey Brad, thanks for reaching out! What pin box number do you currently have installed on your 2021 Grand Design Reflection 31MB? You should find a sticker with a number like "1621" or even a serial number and the brand would work. Not all…

view full answer...

Answer 6

So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure you…

view full answer...

Answer 7

Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance the tapered nose of your 2022 Grand Design Solitude 280RK with the "longer" short bed both of your trucks have would…

view full answer...

Answer 8

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 9

Since you're talking about an offset ball and don't want a slider it sounds like you have the 2024 Sierra 3500 short bed. Even with the offset you aren't going to be able to make a full 90 degree turn. I'm also not sure what your…

view full answer...

Answer 10

Based on the information I can find I see the 2023 Grand Design Solitude 382WD comes with a MORryde Pin Box #MR83QR which has the Lippert Rhino bolt pattern. That would require the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY98GR. You can verify…

view full answer...

Answer 11

Hello David. The Correct Track Trailer Alignment and Lift Kit #RR23QX is definitely going to be your best bet for lifting your 2023 Dutchmen 2533RDF. That said, this kit is not made for any one specific camper, so we generally would want you to check…

view full answer...

Answer 12

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Troubleshooting Mounting Issues With A MaxxAir II RV Vent Cover

Product Page this Question was Asked From

Continue Researching