Lock N Roll Ball Mounts - Adjustable Ball Mount - 336VS503515 Review Video

There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…

The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…

Based on the images you sent in it appears your 2005 Starcraft RT10 does not use a traditional A-Frame coupler so the Lock N Roll #336TS504 will not work for your application. Instead you will need to measure the width between your frame rails the…

You absolutely still need to have safety chains hooked up whenever you tow a trailer, regardless of what type of hitch ball or ball mount you are using. With the Lock N Roll Articulating Hitch #336VS503515 that you referenced and really any ball…

Yes, the Lock N Roll Articulating Hitch for 2" Receivers #336VS511 does need the trailer to have a matching Lock N Roll coupler. The reason is the unique way the hitch and coupler attach, which allows the rotation and smooth ride you'll get…

The Lock N Roll Articulating Hitch w/ 5-Position Channel #336VS503515 that you referenced can be used in the rise position if needed. Since the head of the kit can articulate 360 degrees it can easily flip into the rise position and be used in that…

Good question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled,…

Though we do not have a 5 position Lock N Roll Hitch for a 1-1/4 inch hitch, we do have The Lock N Roll Articulating Hitch w/ 3-Position Channel - 1-1/4 inch Receivers - Vehicle Side - 2.5K #336VS503507. This hitch has a maximum drop and rise of…

The Ark Drop Down Corner RV Stabilizer Jack Kit - 30" Long Corner Steadies - Black Item #ARK94FR fully retracted are about 19-1/2" long. When folded up, the widest point is going to hand down about 4-1/2".

The Ark Drop Down Corner RV Stabilizer Jacks #AR94FR does include the mounting plate which is loosely installed on the jack. This plate has a flat surface area which is 4.6" long x 1.83" wide. It would typically be welded directly to the…

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

You are correct, if you were to extend the length of your trailer tongue it would not lower the capacity of the tongue weight of your hitch. If anything the hitch has more leverage over the tongue weight now like you mentioned so the opposite would…