Lock N Roll Adjustable Trailer Coupler 336VS503 Review Video

There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the trailer…

Good question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled,…

The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…

I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a few…

The Pro Series Adjustable Pintle Hook Mounting Plate for 2" Hitches - 14K lbs #63072 has a measurement from the front of the mounting plate to the center of the hitch pin hole of 9-11/16 inches. It sounds like you are wanting to know the backing…

Usually loops for the safety chains are on the hitch receiver because a pintle hitch like the Buyer's Products #33710045 you referenecd often connects to a mount the B&W #BWPMHD14003 which slides into a receiver. If this isn't how yours…

The Timbren Axle Less kits like the part #ASR5200S01 would be a great upgrade to increase your trailer's axle capacity. Otherwise you could go with a standard axle or another torsion axle from Dexter with increased capacity. If you wanted to go…

Yes, we have just what is needed for your 2022 Jeep Gladiator. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 and use the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep, #3073-P. This adapter plugs into the…

When the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is in the forward position the wheel can move only one direction and it can keep moving forward without the handle moving it. It wouldn't roll back if in forward but if you were…

When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting Trailer…

The Extreme Off-Road Ratcheting Trailer Jack part #ORJW1SU has a 770 lb weight capacity which means so long as the tongue weight of the trailer does not exceed this then you'd be fine. A trailer with GVWR of 4,000 lbs would be no worry at all.

The ARK #ORJW1SU Off-Road trailer jack will need about 21-3/4 inches of available space on the trailer tongue. I wasn't able to make out the dimensions on your tape measure in the photo, so I couldn't say judging by that if it'll fit.…