Review of Lippert Components Camper Jack Parts - Landing Gear Lead Leg - LC119102 Video

There really isn't a difference between the #LC119101 and #LC179014. One is just listed for Venture landing gear sets and the other Lippert. They are both identical though.

In previous interactions we have found the 2010 Keystone Laredo 5th wheels to use Venture VMC900 landing gear. This would give you the Replacement Follow Leg #LC119101. I do recommend verifying this is the correct leg for you by measuring your…

We do not sell that specific piece you reference, however we do sell #LC179014 which replaces the leg and snap pin. You would need to make sure that the measurements match up with your current leg and the weight capacity is appropriate. As far as…

I believe what you need for your 5th wheel is the Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin #LC179013. This replacement leg measures 32" overall, has the same 15-1/2" inner, 17-1/2"…

There are a couple options that could work for your 2008 Keystone. If the landing gear you have is a Lippert and is slow or not working great we do offer replacement motors and gear boxes. The replacement motor I recommend is part #LC141893. This…

It could be the motor but it could also be the screw/nut inside the jack leg that is causing the problem. Since you mentioned that it is hard to crank it manually I suspect that it is likely the screw and/or nut. On jacks that have an ACME screw…

To charge your batteries on your 2015 Lance 1575 from your vehicle or solar power and that is compatible with lithium batteries, I recommend the The Manager30 Battery Management System with Lithium Profile Item #RED88FR and the Pollak…

It sounds like the gearbox could be bad or possibly the motor, this could be easily confirmed by removing each of the components (gearbox/motor) and testing them separately. The gear boxes are luckily pretty standardized and not terribly expensive,…

The distance between the insides of the weld stops on the jack leg #LC362485 is 17-1/2 inches and the outer tube diameter is 2-1/2 inch by 2-1/2 inch.

It sounds like you have the Lippert Ground Control Electric Leveling System and in which case you will need the Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System part #LC305340 for the leg and motor or the…

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice.…

In regards to the Lippert Ground Ground Control 3.0 Leveling System, if you just need a new front leg then this can be replaced with the Replacement Front Jack for Lippert Components Ground Control 3.0 Leveling System part #LC362485. If you need a…