Review of Kodiak Trailer Brakes - Slip On Disc Brake Kit - K2R35S Video

The Kodiak Disc Brake Kit #K2R35S can fit on a trailer with 14 inch wheels as long as the axle is a 3,500 lb axle and has brake flanges behind the spindle like in the picture I attached.

There is only a single difference between the two 3,500 lb Kodiak disc brake hub and rotor kits you asked about, and that's the protection given to the calipers. - KodaGuard-Coated Cast Iron Calipers: Kodiak Disc Brakes #KOD59FR - Dacromet-Plated…

From the face of the brake bolt flange you will need at least 2-1/2" of clearance for the caliper in the Kodiak Disk Brake Kit #KOD59FR to not hit the trailer frame. This measurement is also going to be 5.57" from the hub face which will…

We do carry an 89" long axle with a 74" spring center. We have the #e53GR which is a 3,500 lb axle with a 4" drop. We also have the #e38GR which is a straight axle beam with no drop. We also have the disc brake kit #KOD59FR. This kit…

Yes, the DeeMaxx Disc Brake Assembly #DE89YR will fit on a 3,500lb UFP axle. You may need a different Grease Seal #168255TB depending on the age of your axle. If you have a grease seal with a 1.68" inner diameter this is the seal you will need.

The Kodiak Disc Brakes for 3,500 lb Axles #KOD59FR have a KodaGuard coating on the brake calipers which gives them a 500 to 600 hour salt spray rating and makes these a great option for trailer owner's who either live near salt water or go…

We do have the parts you're needing, but the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs #KHR10D only comes with the races included; the bearings, grease seals and caps are not included and must be purchased…

Correct, the Replacement Universal Caliper part #K71-773-01 for driver side and part #K71-773-02 for passenger side have a 2-7/8" spacing between the two caliper mounting bracket bolts therefore will attach directly to the brake mounting flange…

Yes, the direct replacement for your Titan 225S passenger's side brake caliper is the #K71-773-02. For the driver's side use part #K71-773-01. These brake calipers are compatible with 3,500 lb axles with 10 inch brakes, which according to…

Since you are noticing that the tires on just one axle of your trailer are leaning when making turns, it's possible that you are towing an out of level trailer. Check to make sure that when the trailer is connected to your tow vehicle, the…

The best stabilizers we offer for a trailer that sits high off the ground are going to be the Ultra-Fab Ultra Scissor Jacks part #UF48-979032 which offers 30" of lift. This option mount permanently on the trailer but it also completely retract…

You are correct, if you were to extend the length of your trailer tongue it would not lower the capacity of the tongue weight of your hitch. If anything the hitch has more leverage over the tongue weight now like you mentioned so the opposite would…