bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Does the Kodiak 10 Inch Hub and Rotor Assembly Come with Bearings and Seals  

Question:

I wasreading the response and these are exactly what I need. It states it is is the bearings, seals, and cap. I dont see a picture of the caps and wanted to make sure before i ordered. So my question really is does it come with the caps for over the zero fitting?

0

Expert Reply:

We do have the parts you're needing, but the Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs # KHR10D only comes with the races included; the bearings, grease seals and caps are not included and must be purchased separately.

You can use the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100 which will give you the bearings to fit in these hubs and also includes the tang washer and cotter pin. The only other part you would require are the grease caps, which are available with the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 # RG04-040.

If you wanted to purchase the parts individually then you'd need the grease seals plus the # L44649 and # L68149 bearings, grease seal # RG06-050, the Replacement Spindle Washer - Tang Type for E-Z Lube # 5-101 and a cotter pin # 165649.

expert reply by:
0
Erik B
Ask The Experts a Question >>

Products Referenced in This Question








Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>