How Much Clearance Is Required For the Kodiak Disc Brake Kit # KOD59FR?
Question:
Im designing a stock trailer and am planning to use these disc brake assemblies. What inboard distance will I need for caliper clearance from the wheel mounting face on the rotor to the trailer frame? Better yet, do you have a .stp file of the assembly that I can use in my design model? The literature says they will work with 13, 14, and 15inch wheels. Im assuming they also work with a 16inch wheel? Thanks in advance for your help!
asked by: Mike Z
Expert Reply:
From the face of the brake bolt flange you will need at least 2-1/2" of clearance for the caliper in the Kodiak Disk Brake Kit # KOD59FR to not hit the trailer frame. This measurement is also going to be 5.57" from the hub face which will help you determine how much clearance is needed for your tires. Typically you will want at least 1" of sidewall clearance for the tires.
Yes, this will work with 16" trailer wheels if you are able to find them with a 5 on 4-1/2" bolt pattern. This is why we only list with 13", 14" and 15" wheels.
Product Page this Question was Asked From
Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Video: Review of Kodiak Trailer Brakes - 10 Inch Hub/Rotor Dacromet E-Z Lube Disc Brakes - KOD59FR
- Q&A: Can Dexter Actuator # T47457007K Replace Titan Model 60
- Search Results: dx29fr
- Shop: Brake Controller
- Q&A: Replacement Axle And Disc Brake Kit For A 2013 MFI Boat Trailer
- Q&A: Will DeeMaxx Disc Brake Assembly # DE89YR Fit a UFP Axle?
- Video: Review of Kodiak Trailer Brakes - Slip On Disc Brake Kit - K2R35S
- Search Results: titan brake caliper
- Search Results: 3500 torsion axle
- Video: Kodiak Trailer Brakes KCMB12D Review
- Q&A: Comparing Uni-Servo and Free Backing Hydraulic Drum Trailer Brakes
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Q&A: What Does KodaGuard Coating on Kodiak Disc Brakes Do
- Search Results: brake calipers
- Search Results: 2 inch receiver hitch
- Video: Titan Premier Disc Brake Kit Installation
- Video: RC Manufacturing Trailer Toolbox - A-Frame Trailer Toolbox - 350975 Review
- Video: Electric Over Hydraulic Disc Brake Installation HBA16
- Q&A: Replacement 18-3/8" Long Double Eye Leaf Spring for Yacht Club Pontoon Trailer
- Search Results: disc brake conversion kit
- Search Results: brake actuator
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer