Correct Replacement for Ttian 225S Disc Brake Calipers

Question

Question:

My old 225S caliper mounts onto a caliper bracket that has a 5 gap between the mounting bolt centers and is attached to the axle with four bolts that surround the spindle on the axle flange part #T4840900. Does the universal replacement caliper require a different bracket, or does it mount directly onto the axle flange which is 2 7/8 between bolt centers?

asked by: Steve W

1

Helpful Expert Reply:

Correct, the Replacement Universal Caliper part # K71-773-01 for driver side and part # K71-773-02 for passenger side have a 2-7/8" spacing between the two caliper mounting bracket bolts therefore will attach directly to the brake mounting flange on the axle so the flange you have now with 5" bolt centers will be discarded.

expert reply by: Conner L

1

click to enlarge

Answer 1

As it looks like you have a Titan model 60 actuator, we definitely have replacements for you. If you wanted to replace the whole actuator, the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - Multi-Fit Ball - Bolt On - 6,000 lbs…

view full answer...

Answer 2

I do have an option for you but I think you'll have a hard time finding a direct replacement for the disc brake caliper you have now as there are no identifying marks and I am not able to confirm this for you. Therefore, I really think the most…

view full answer...

Answer 3

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

view full answer...

Answer 4

Yes, the direct replacement for your Titan 225S passenger's side brake caliper is the #K71-773-02. For the driver's side use part #K71-773-01. These brake calipers are compatible with 3,500 lb axles with 10 inch brakes, which according to…

view full answer...

Answer 5

Based off of my research, you can use the Replacement Caliper for Titan 10" Brakes #K71-773-02 for the passenger side, and the Replacement Caliper for Titan 10" Brakes #K71-773-01 for the driver's side, will work for you. These come…

view full answer...

Answer 6

You sure can. We offer a replacement Titan standard 10 inch caliper mounting bracket with a 4 bolt hole pattern as part #T4840900. .

view full answer...

Answer 7

To replace your GloBrite 126 marker lights you can use the #MC44RB for the red light and the #MC44AB for the amber light. Both of these lights are 2 wire lights and will work well on your cargo trailer. And yes, we can ship this particular product to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Correct Replacement for Ttian 225S Disc Brake Calipers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching