Does Dexter 3,500 lb Leaf Spring Axle Use Number 84 Spindle
Question:
I am looking at one of the Dexter axles, and am hoping to reuse my hubs and brakes that I already have, I measured my current spindles and have determined that they are the R20384EZ, except not currently ez lube. I just need to confirm that this is the same spindle size that is on the completed axle tube in assembly 7359765, 3500# Dexter 95. If you need more information to confirm spindle size the serial number off of this axle that I am replacing is D1719401 , from Dexter.
asked by: Arlo S
Expert Reply:
Yes, the Dexter axle part # 7359765 that you referenced uses the same 84 spindle that you have measures. This will allow you to reuse your current hubs and bearings.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: 84 spindle
- Search Results: dexter self adjusting brakes
- Search Results: grease seal 58846
- Search Results: dexter brake drum
- Video: TruRyde Electric Trailer Brake Kit Installation
- Search Results: grease seal 10~19
- Video: Review 2 of Dexter Axle Trailer Axles - Leaf Spring Suspension - 7359765
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Q&A: Recommended 3,500 Lb Dexter Axle 94" Long at Hub Face
- Q&A: Dexter 3,500 lbs Replacement Axle
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Q&A: Will Dexter Axle Beam 7359765 Replace Bent 95" Hub Face To Hub Face Dexter Axle?
- Q&A: Why Self Adjusting Brakes or Manual Adjust Trailer Brakes
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Shop: Suspension Enhancement
- Search Results: l44649
- Search Results: l68149
- Q&A: What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer Suspension
- Video: Dexter Tandem Axle Trailer Heavy-Duty Suspension Kit Installation
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-359-00
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Shop: Brake Controller
- Shop: Trailer Hitch