Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e84YR Video

There will be 54" between the backs of two of the Dexstar Steel Mini Mod Trailer Wheel item #AM20365 when installed on the 60" Trailer Axle with Idler Hubs item #e84YR. This is without the tires so when you add rubber to the item #AM20365…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The parts and quantities do look mostly good, but you would only need one of the hanger kits #APS2. These are actually sold as a full kit for one axle. As to said axle, though, it would be a good idea to double check that your spring seats match the…

The EZ Lube Spindle #TRU37FR that you mentioned is to be welded onto an axle tube. If you were to install it directly to your trailer frame the capacity would be greatly reduced not to mention unknown. Also, the ride with no suspension would be…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

We can very likely get this worked out. Can you tell me how far it is from spring center to spring center? This is the distance from the middle of one spring to the middle of the other. We will also need the hub face to hub face measurement. This is…

The Aluminum Lynx Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Silver #LH45FR will need to be used with the long style acorn lug nuts, the Chrome Trailer Wheel Lug Nut part #12CLN is what I recommend.

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

Since you want to change your trailer hubs to the 5-on-4-1/2 bolt pattern I suggest you select a 60-inch axle kit that includes idler hubs, such as one of the two kits shown on the linked page. These two 2K-rated axle kits include 5-on-4-1/2 hubs,…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

Absolutely! If your auto-flex 2200 lb axle does not already have a 4-bolt brake mounting flange you would need to add one. Assuming that your axle is 1-3/4" diameter you would need the #4-34. The brake mounting flange will need to be welded on…

With the axle measurement and the bearing number, I can confirm that you have 2,000 lb capacity axles on your trailers. You will want to get the Brake Mounting Flange, #4-34, to weld onto each side of each axle. With that flange in place, you will…