Kenda Tires and Wheels - Tire with Wheel - AM30153 Review Video

For a wheel and tire on an 8 inch rim that has a D load range rating with a 4 bolt pattern you would want the part #AM30153. I attached a review video for you to check out as well.

With trailer tires you need to run them at the max PSI listed on the sidewall to ensure you get the full capacity of the tire and to prevent heat build up in them. For the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 -…

I did some research and it looks like your 1997 Cushman Titan uses 5.70 x 8 tires. The tire/wheel combo I recommend is the Kenda part #AM30155. This combo is a Load Range D mounted on an 8-inch diameter rim with a 5 on 4-1/2 wheel bolt pattern.…

The speed rating for the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel #AM30153 is 65 mph.

In the 4-on-4 wheel bolt pattern we offer trailer wheels/tires from 8-inch up to 14-inch diameter, but no 15s. The available products in this bolt pattern are shown on the linked page. The highest weight capacity wheel/tire in this 4-on-4 pattern…

I would first recommend that you check to see how much clearance your current tires have. This will help you determine if you can fit any larger tires without modifying the fenders or suspension. I like to have at least 1" of clearance…

The two tire sizes you referenced, 4.80-12 and 5.30-12, both fit 4-inch wide rims, but they differ in their overall diameter. A 4.80-12 tire/wheel when fully inflated will have a diameter of 20-1/2-inches while the 5.30-12 size will be just under…

The only 5.70 x 8 sized tire we carry that is a Load Range D is the Kenda K353 #AM10013. It's a bias tire with a maximum capacity of 1,075 at 100 psi. The maximum speed rating on this tire is 65 mph. I don't know what your…

The Go Power Lithium RV Battery, #34282740 is a great choice and yes there is a statement of charge current having a recommended 50 amps with a max of 100 amps. However, please be aware that your Class C, like most campers, is a 30 amp service…

Greasing the bearings is actually a fairly easy process. It does take a little bit of time to complete, but after you are done you won't have to worry about greasing the bearings again for a few years. I do have some recommendations to help…

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

Most tire manufacturers don't run capacity testing on their tires at varying tire pressures so the best practice is to run the tires at the maximum pressures listed on the tire's sidewall. At pressures below the tire's…