Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11140495 Review Video

The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the…

To add a 4-way to your 1998 Ford E-350 Econoline that does not have the factory tow package, all you need to do is add the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118344, which uses plug-in connectors that you will install…

Sure can; there are a couple parts you'll need to add a 7-way to your 2023 Chevy Bolt EUV, which are the following: - Tail Light Converter w/ 4-Way Flat Trailer Connector #C59496 - Universal Installation Kit for Trailer Brake Controller #ETBC7…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

As long as your 2010 Lincoln Navigator has a 2" hitch receiver the Flint Hill Goods Square LED Brake Light Hitch Cover #FHG72VR will fit. If you don't already have a 4-Way flat connector (or yours is damaged) then you also need the Hopkins…

I have another option for you, but the Breakaway Cable for Blue Ox Patriot Proportional Braking Systems that was included with your Blue Ox Patriot #BLU37TR at cannot be extended as that will void the warranty of the cable and braking system if…

Before installing a brake controller to your 2006 Ford Van, you need to have a 4-way and a 7-way wiring harness installed. First, you need to install the 4-way. If you need a 4-way harness, I recommend the Hopkins Plug-In Simple Wiring Harness -…

Since you already have a 4-way connector on your 2018 Toyota Highlander you need to use one of our adapter kits to convert it to a 7-way. If the trailer doesn't have brakes you only need to power its lights and the battery so you can use part…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, you will only need to run one blue wire from your brake controller to the 7-way connector on the back of your motorhome, this wire is what takes the signal from your brake controller to your tow dolly to tell your dolly how much braking power…

I understand your confusion. The views of the trailer connector shown on the wiring page on the website are from the INSIDE of the plug, where you would wire it. The markings on the front cover do show which terminal serves which function, and are a…

The Curt Universal Installation Kit #C57186 is universal and will work on your 1997 Chevrolet Silverado 1500. It does not have a mounting bracket for the 7-way and will require you to already have a 4-way Trailer Connection #C55315. I recommend using…