Installing 7-Way Trailer Connector on 2014 Ford E-350 Van
Question:
I have a 2014 e350 super duty Ford van with a Stahl body . I would like to install trailer light 7 pin connector on the truck. There are 2 plug in connectors just behind the gas tank. The name on the connectors is EWH Speectrum part ID 207823. One connector has yellow , green , white, brown. The other has blue, orange, black. I would like to plug into these since it is all set up already.
asked by: Richard K
Helpful Expert Reply:
The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118551 which will connect to your factory wiring behind each tail light. Then you will use kit # ETBC7 to give you the wire, connectors, adapter, and circuit breakers needed.
Then you can simply install a brake controller. I recommend the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR because of its function and the clean look it provides.
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Brake Controller
- Shop: Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers
- Shop: Adapter 4-Pole to 7-Pole and 4-Pole
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Shop: T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Search Results: redarc mount
- Search Results: wilco
- Search Results: redarc liberty
- Search Results: redarc panel
- Shop: Roadmaster Hitch Spare Tire Mount with 2" Receiver Opening - 2" Hitches
- Shop: Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob
- Shop: Front Mount Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Trailer Wiring Harness Installation - 2014 Ford Van
- Q&A: Can Rhino Rack Vortex Crossbars for Retrax XR Fit Truxedo Elevate TS Rails
- Article: Brake Controller Installation on a Ford Full-Size Van
- Shop: Roof Rack
- Article: Trailer Wiring Diagrams
- Video: Trailer Wiring Harness Adapter Installation - 2011 Ford E-350 Van
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11140495 Review
- Video: Hopkins Trailer Wiring Harness Installation - 2022 Chevrolet Colorado
- Video: Review of CURT Heavy Duty Receiver Hitch - Weld-On Hitch - C37CR
- Q&A: Wiring Harness That Will Fit 1998 Ford E-350 Econoline Without Factory Connector
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Review
- Search Results: 90 degree 7 way
- Q&A: 7-Way Wire Bundle Recommendation to go With Heavy Duty 7-Way Connector PK11700
on Custom Fit Vehicle Wiring
John
4/3/2024
So to elaborate on the OP request. These 2 connectors are for a 7 pin harness. The connectors are c494 and c4000. On C494 orange is battery charge 12v, grey-brown is reverse lights, blue is the trailer brake. On C4000 Yellow is left turn, Green is right turn, Brown is parking/ running lights and White is ground. Is there really not a harness that plugs easily into these connectors? I'm having the hardest time finding it.