Hopkins Wiring HM48595 Review Video

The hardware with our etrailer Receiver #e85AR for your 2009 Jeep Liberty is M12-1.75 thread. We do include this size in our Metric Tap Kit #PT22FR if you do not already have it. A Brush #814092 will also help you clean out the threads with some…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

You will need a 1-1/2" wrench like part #C20001 in order to install the nut on the 2" Hitch Ball part #63845. A 1-7/8" wrench would be much too large.

The EcoHitch Hidden Trailer Hitch Receiver #306-X7174 weighs 37lbs. This weight along with your Ball Mount #3371803307 (9lbs) will need to be added to the payload when considering towing a trailer. Anything you add to the vehicle you will need to…

In order to equip your 2010 Toyota RAV4 with a 7-way socket to enable you to pull a trailer with electric brakes you will need a few items. First you will need to install a 4-pole flat wiring harness (unless there is already a working 4-pole on your…

The etrailer hitch part #e98864 is the best 2 inch hitch option for your 2012 Toyota RAV4 unless you wanted to go with a more concealed looking hitch with the EcoHitch #306-X7174 which does cost a little move but would only have the hitch opening…

Some trailer wiring harness 4-Way and 7-Way connectors require a power wire to be routed from the harness to the vehicle battery. The power wire is required on trailer wiring harnesses for some vehicles because the electrical system on those vehicles…

When installing a wiring harness like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, #118412, on your 2012 Toyota RAV4, you will want to follow the installation instructions. When the wiring harness is wired according to the…

LED type lights are very highly efficient, using only about 1/10th the power required by standard incandescent light bulbs. This means that certain wiring harnesses will cause one or more of the LEDs to light up just from the very low-level residual…

The Hopkins Fold-Over Mounting Bracket #HM48595 that you referenced can't work with Curt harnesses like the part #C56040 or the T-One kit part #118467 as it's a bit too small. You'd have to use the Hopkins wiring harness part #HM11143865…

I pulled one of the Hopkins Fold-Over Mounting Bracket, part #HM48595 from our warehouse and took a couple measurements for you. When closed, the bracket can hold a 4-way connector that measures 1/2 inch tall and 1-1/3 inches wide. The bracket does…

When we installed the Tekonsha trailer wiring kit part #118540 on a 2017 Ford Explorer we used the install bracket part #18144 and attached it to the bumper of the vehicle.