Adjustable Height Pintle Combo with 2-5/16 inch Ball, 2.5 inch Hitch, and Rated for 20k

Question

Question:

I need a pintle hook with a 2 5/16 ball, 2 1/2 size multi-position , rated for at least 20,000 lb. What do you have and how much is it?

asked by: Lanny

0

Expert Reply:

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part # C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

expert reply by: Jameson C

0

Answer 1

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part #C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part #C45908.

view full answer...

Answer 2

I do have options for you but there is not a pintle hook adapter for the B&W Tow & Stow 3-Ball Mount part #BWTS20048B so the only way to obtain a pintle hook with the Tow & Stow feature is to purchase the B&W Tow & Stow Pintle…

view full answer...

Answer 3

Yes, the 2-5/16 inch hitch ball that comes included with the Curt Pintle Hook #C45908 can be swapped out with a different sized ball that features a compatible shank. For a 2 inch hitch ball to use with this assembly the Curt #C48820 will work…

view full answer...

Answer 4

Yes, the 20K weight rating of the Blue Ox Adjustable Ball Mount with Pintle Hook #BLU25XR is the same whether you're using it as a standard hitch ball or in the pintle hook application. This is a nice, solid piece of towing gear that I recommend…

view full answer...

Answer 5

We have Gen-Y torsion style adjustable ball mounts with 21k capacities like the part #325-GH-1825 for a 3 inch hitch or part #325-GH-1324 for a 2-1/2 inch hitch.

view full answer...

Answer 6

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 7

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

view full answer...

Answer 8

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…

view full answer...

Answer 9

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…

view full answer...

Answer 10

In regards to fifth-wheel hitches, there are a number of jaw types. A slide bar jaw is found on the less expensive hitches, such as the Pro Series #PS30129. This type of jaw is a secure one for your trailer but you will notice some king pin noise and…

view full answer...

Answer 11

It sounds like you are looking for an adjustable ball mount that has both a hitch ball and pintle hook combo. If that is the case then we have the perfect option for you in the Curt Pintle Hook part #C45908 which comes with a pintle hook/ball combo…

view full answer...

Answer 12

There are replacement ball mount platforms available for each of the Curt channel style adjustable ball mounts. If you have the Curt Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls #C45900 then you would want Replacement 2"…

view full answer...

Adjustable Height Pintle Combo with 2-5/16 inch Ball, 2.5 inch Hitch, and Rated for 20k

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching