Review of Gen-Y Hitch Trailer Hitch Ball Mount - 21K Adjustable Ball Mount - 325-GH-924 Video

The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…

We have Gen-Y torsion style adjustable ball mounts with 21k capacities like the part #325-GH-1825 for a 3 inch hitch or part #325-GH-1324 for a 2-1/2 inch hitch.

It looks like the pin part of the DO45 (which takes the place of a standard hitch ball) has a shank with a 1-1/4" diameter so I recommend using the Curt Heavy Duty Forged Ball Mount #C45340 with a Gen-Y hitch as this ball mount has up to a 17K…

Lunette rings like the Curt SecureLatch Lunette Ring - Adjustable Channel Mount - 3" Diameter - 40,000 lbs #CU99FR do not have tongue or vertical weight limits. These types of rings are designed for heavy duty situations and loads and are not…

The 2-3/4" Channel #CU69FR you have will only accept the Curt SecureLatch Lunette Ring #CU99FR. You will need to have a new channel welded on to use a 2-5/16" coupler. I recommend the Demco Trailer Coupler w/ 5-Position Adjustable Channel…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part #C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

The Gen-Y Torsion 2-Ball Mount #325-GH-1324 is going to be the adjustable ball mount which gives you the greatest distance from your hitch pin hole center. From the furthest hole center to ball center this is 16" length. That is 2-3/4"…

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

Yes, you can use a weight distribution hitch system in one of the Gen-Y Stacked Torsion Receivers like #325-GH-1325. The Gen-Y receivers are extraordinarily solid and have a very high capacity - this one is rated for 21,000-lbs. This particular…