Availability of Gen-Y Torsion Style Adjustable Ball Mount with Over 20k Capacity

Question

Question:

I have a 20,000 stacker trailer I pull behind a toter home. does anyone make a torsion hitch like the Gen-Y Hitch for that heavy a unit?

asked by: Larry

1

Helpful Expert Reply:

We have Gen-Y torsion style adjustable ball mounts with 21k capacities like the part # 325-GH-1825 for a 3 inch hitch or part # 325-GH-1324 for a 2-1/2 inch hitch.

expert reply by: Jameson C

1

Answer 1

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

view full answer...

Answer 2

The Gen-Y Torsion 2-Ball Mount #325-GH-1324 is going to be the adjustable ball mount which gives you the greatest distance from your hitch pin hole center. From the furthest hole center to ball center this is 16" length. That is 2-3/4"…

view full answer...

Answer 3

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 4

The best and only option we have that covers everything you need is the Curt Pintle Hook Combo part #C45908 which fits the 2-1/2 inch hitch size, has a 2-5/16 inch hitch ball, is adjustable in height, and has a 20k capacity.

view full answer...

Answer 5

While your Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches - Matte Black #ERT00110 will physically fit the shank of the Shocker Hitch HD Ball Mount #SHK35VR, it will also interfere with the design of the shock absorber. As…

view full answer...

Answer 6

The Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs #C45908 can be latched and locked in the up position to allow you to use a standard coupler with the hitch ball. I've attached a video to assist.

view full answer...

Answer 7

Yes, you can use a weight distribution hitch system in one of the Gen-Y Stacked Torsion Receivers like #325-GH-1325. The Gen-Y receivers are extraordinarily solid and have a very high capacity - this one is rated for 21,000-lbs. This particular…

view full answer...

Answer 8

In regards to fifth-wheel hitches, there are a number of jaw types. A slide bar jaw is found on the less expensive hitches, such as the Pro Series #PS30129. This type of jaw is a secure one for your trailer but you will notice some king pin noise and…

view full answer...

Answer 9

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…

view full answer...

Answer 10

For a flat towing setup a torsion spring version of the Gen-Y ball mount like the #325-GH-1825 wouldn't benefit you a whole lot. You don't have enough tongue weight to really activate the torsion setup so I wouldn't recommend it. So what…

view full answer...

Availability of Gen-Y Torsion Style Adjustable Ball Mount with Over 20k Capacity

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching