Equal-I-Zer Weight Distribution Shank for 2-1/2 inch Hitch 3 inch Drop

Question

Question:

Does the EQ90-02-4500 come with a 2-1/2” shank?

asked by: Jeff V

0

Expert Reply:

The Equal-I-Zer shank part # EQ90-02-4500 that you referenced fits a 2 inch hitch. For a similar shank that fits the 2-1/2 inch hitch you'd want the part # EQ90-02-4700. This has same 3 inch drop.

expert reply by: Jameson C

0

Answer 1

The reducer sleeve does need to be a bit smaller than the interior dimension of the receiver or it could become stuck. Typically a bit of 'slop' between the shank and the receiver or in this case, the reducer and shank isn't…

view full answer...

Answer 2

I would be happy to recommend the correct weight distribution shank for your Reese weight distribution hitch, but with out knowing the exact system you have there are two different shank styles, so you will want to pick the one that matches your…

view full answer...

Answer 3

Your best bet for gaining clearance between your new truck's tailgate and your weight distribution system is to use a longer shank instead of a hitch extender. We offer the 18-inch Equal-i-zer shanks #EQ90-02-4500 and #EQ90-02-4600, both of which…

view full answer...

Answer 4

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 5

It sounds like you are looking for a weight distribution system with extended shank and if that is the case I have some great options. The Equal-i-zer Weight Dist Shank part #EQ90-02-4500 measures 18" long overall and offers up to a 3"…

view full answer...

Answer 6

Currently we do not. The Equal-i-zer Weight Dist Shank #EQ90-02-4500 measures 18" long with a 7" rise/3" drop and fits a 2" hitch. Currently the longest we have for a 2-1/2" hitch is the Equal-i-zer Weight Dist Shank…

view full answer...

Answer 7

For the head of Equalizer systems the torque rating is tighten the angle set bolt until it comes into contact with the shank and lifts the head to where the spacer rivet also comes into solid contact with the shank. Tighten the angle set bolt an…

view full answer...

Answer 8

The 5/8" diameter x 4-1/2" long bolts and nuts in the 4k Replacement Bolts for Equal-i-zer Weight Distribution Head #EQ90-02-9400 are both 15/16" head sizes. The 6k-14k Replacement Bolts for Equal-i-zer Weight Distribution Head…

view full answer...

Answer 9

To gain clearance between the trailer and your truck you can replace the existing adjustable shank on your Fastway Weight Distribution System with the Equal-i-zer #EQ90-02-4500 (max 7" rise or 3" drop) or #EQ90-02-4600 (max 8" rise or…

view full answer...

Answer 10

Choosing the proper shank is a very important task. The shank will correspond to the height of both the vehicle and trailer. In order to choose the proper shank, you will need to do a bit of measuring. To select the correct rise/drop, you will first…

view full answer...

Answer 11

That's a very cool bike so I can see why you want to bring it but the issue is that any type of extension is going to reduce your tongue weight capacity by 50 percent which is not something you will be able to do. The only thing you can do to add…

view full answer...

Answer 12

The longest extended shank we offer will be the Equal-i-zer #EQ90-02-4500, which is 18" long, has a maximum tongue weight capacity of 1,400 lbs, fits 2" x 2" receivers and offers up to a 7" rise or 3" drop. Equal-i-zer…

view full answer...

Equal-I-Zer Weight Distribution Shank for 2-1/2 inch Hitch 3 inch Drop

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching