Installation Instructions for Blue Ox Track Pro Weight Distribution Hitch

Question

Question:

Can you send me a copy of the instructions??

asked by: Roy M

0

Expert Reply:

The instructions for the Blue Ox Track Pro # BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.

expert reply by: Erik B

0

Answer 1

Thanks for the picture! The Equal-i-zer 2-1/2" Weight Distribution Shank item #EQ90-02-4800 that you referenced has 3/4" holes that are spaced 1-1/4" apart. If the head of your EAZ-Lift system has the same spacing then this shank would…

view full answer...

Answer 2

I checked with Edge and the CS2 part #EP85350 that you referenced has three levels for your 2018 Ford F-150 with a 5.0 liter V8. 87 octane tune adds 24 HP & 25 LB-FT of Torque Tow tune adds 30 HP & 31 LB-FT of Torque Extreme tune adds 49 HP…

view full answer...

Answer 3

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 4

The total weight of the Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW0750 is 87 lbs but in case you were concerned that it would add that weight as tongue weight you should note that the weight of a weight distribution system does not…

view full answer...

Answer 5

You can secure the bars when not in use, but it is not recommended since the weight distribution system was not meant to be used like that. Instead, a unique feature of the Blue Ox SwayPro Weight Distribution #BXW0750 is that there are locking pins…

view full answer...

Answer 6

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 7

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

view full answer...

Answer 8

For as much tongue weight as your trailer has a weight distribution system would be a great choice to reduce the porpoising, reduce suspension sag, and improve handling and braking. For that the Blue Ox weight distribution system part #BLU47FR would…

view full answer...

Answer 9

The Blue Ox TrackPro part #BLU47FR would work great with your Grand Design XLS 22RBE and your 2018 Toyota Sequoia SR5. I looked up the weight of your trailer and since it looks like the loaded tongue weight of the camper would fall right in the…

view full answer...

Answer 10

Our Blue Ox TrackPro part #BLU47FR is the same as the BX0850. Blue Ox used to have all of their systems in that grey/bronze finish that you mentioned but they recently started making them more of a black color. This is especially true for the…

view full answer...

Answer 11

This adapter plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully pry the panel out and…

view full answer...

Answer 12

You are able to use a weight distribution system while having air bag suspension on your 2009 Land Rover Range Rover Sport. When choosing the correct weight distribution system I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control -…

view full answer...

Installation Instructions for Blue Ox Track Pro Weight Distribution Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching