Review of Demco Carts and Dollies - Trailers - DM13920-92 Video

Thanks for reaching out! The replacement brake pads for your Demco Kar Kaddy SS #DM9713045 can be found as part #DM59VR on our site. This includes parts for both sides of the tow dolly. If you want to replace the whole assembly then you can do so by…

I checked the manual for the Demco DA91 actuator part #DM8759131 and if the lever is pulled it can be disengaged by using a screwdriver to lift upward on the front of the flat emergency lever spring while pulling lever forward till it releases.

The correct replacement parts for the Demco hub #DM04369 are: - 10" Brake Rotor for Demco Tow Dollies #DM03927-92 - Brake Caliper #DM13825-92 - Brake Caliper Mounting Bracket #DM13920-92 These are the exact replacement parts that work with the…

The brake rotor designed to fit on the #DM04369 is the Replacement 10" Brake Rotor for Demco Tow Dollies - Qty 1 #DM03927-92. I've also listed the other replacement brake parts that are available for the Demco Kar Kaddy tow dolly below. -…

The Replacement Hub Assembly for Demco Kar Kaddy #DM04369 is the only hub assembly we have for the Kar Kaddy's. There is no 5 on 4 bolt pattern, you likely already have a 5 on 4-1/2 bolt pattern. I recommend double checking the measurements. I…

Rather than installing hydraulic drum brakes you should look at a Kodiak Disc Brake Kit #K2R35D for your tow dolly. That is the style the new Demco Kar Kaddy X Tow Dolly #DM9713093 uses as it would make for a much better setup that will be easier to…

Unfortunately, we don't have the parts you need to convert your Kar Kaddy directly over to a braking system because the axle is so specialized. You are correct that you will need a complete system for your dolly to make it electric brake…

The only axles we have hubs for that do not have spindles are the Replacement Hub Assembly for Demco Kar Kaddy Tow Dolly - Qty 1 #DM04369 These have the rectangular mount you mentioned but we do not have any brake options for these hubs. If you want…

The bolt pattern of the Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly #DM04369 is definitely 5 on 4-1/2 inch which is the same as 5 on 115 mm. This hub definitely fits the Demco Kar Kaddy chrome replacement wheel…

I went out to the warehouse and measured the Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly #DM04369 from the gold piece rearward, and it measured 4-1/4" long.

It does appear your Croft tow dolly is manufactured by Demco as I do see they show the replacement parts for the Croft tow dolly manufactured by Demco. I do recommend verifying with Croft exactly what all parts are going to be cross compatible as…

Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…