What is The Length and Height Of The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227?

Question

Question:

I gather it weighs about 30 lbs but am wondering the actual length? Am hoping i can pack one inside my suitcase or carry onto an upcoming flight to Canada? Thanks

asked by: Lorne R

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227 does weigh 30lbs. The widest point on the receiver is 40-1/4" and it has an overall height of 13-1/4".

expert reply by: Bud M

0

Answer 1

What you are describing is normally the result one 1 of 3 issues: First, there could be some corrosion in or on the connectors on the vehicle or trailer side or both. Second there could be a bad ground. Bad grounds can cause all sorts of bizarre…

view full answer...

Answer 2

Assuming the lights and wiring on your older trailer are in good condition you will not have any issues connecting with and powering its standard incandescent lights with a tow vehicle that is equipped with LED lights. The difference in light…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Curt #C13410 and Draw-tite #76227 are very similar in design and both have the same weight ratings of 600lbs tongue weight and 4,000lbs of trailer weight. I do like that Draw-Tite does add the additional plate of steel in between the hangers that…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

What is The Length and Height Of The Draw-Tite Max-Frame Trailer Hitch Receiver # 76227?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching