Customers compare C45405 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Using a Reducer Sleeve #e28JR is not going to reduce your trucks towing capacity unless you are using a lower capacity hitch. As you are most likely using a weight distribution hitch you should not have any issue with towing your 10,000LB travel…
view full answer...The Curt Hitch Adapter #C45405 will not reduce the tongue weight of your hitch. Many adapters that extend the length will reduce towing capacity based on tongue weight, but this adapter isn't one of them. It will work fine with the Curt…
view full answer...A reducer like the Curt Reducer Sleeve 2-1/2" to 2" #C45405 will work with your current shank without any loss of capacity. Because there is another moving part, it may give you slightly more noise than using a 2-1/2 inch shank like…
view full answer...The B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000 lbs #BWRVK3600 weighs 219 lbs with shipping materials and 213 lbs when unboxed and ready for use. This can be installed in two parts with the base weighing…
view full answer...You won't have any issues with this setup. The payload capacity of the truck refers to the capacity of the aluminum truck bed where the pin-weight capacity refers to the amount of additional weight the axles and frame can support. With the hitch…
view full answer...There is a sleeve that will work with a Reese weight distribution system, the Curt Reducer Sleeve 2-1/2" to 2" #C45405. I've attached a couple review videos of this product for you to take a look at as well.
view full answer...If the Yakima RidgeBack Bike Rack was just purchased then most likely the wedge is not tightened correctly and you just need to redo that portion of the install process. However, if this is an older bike rack then most likely the cause of this is…
view full answer...You can definitely make any modifications you'd like to your Yakima HoldUp EVO, part #Y02479. However, you should know that this will void your warranty, and so I cannot recommend it. If you choose to drill another hole and use the Replacement…
view full answer...This reducer sleeve will work fine on your Class V 2-1/2 inch receiver. We are located in Wentzville, Missouri but we can ship the item to you with no problem.
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...I recommend the Curt Class V Receiver Hitch part #C15802 for the 2019 Ford F-250 Super Duty because because it offers more towing capacity than the B & W option and the installation is a bit easier since it is one solid piece that you bolt up to…
view full answer...Trailer tires typically have a lifespan of 5 to 6 years. This means that no matter how good the tread depth may be, no matter how few dry rot cracks you might see in the sidewall, you'll want to consider replacing the tires when they reach this…
view full answer...