Compatibility of Trailer Hitch Reducer Sleeve or 2-1/2 Inch WD Shank For New Truck Compatibility
Question:
Hi, I have a Fastway e2 square bar WD system item # FA92-00-1000 I used to tow a 6000lb dual axle Airstream with my previous tow vehicle, which had a 2inch hitch receiver. My new tow vehicle F250 has a 2.5inch receiver, and I would like to know what the best option is for me to use this setup with my new vehicle. Can I simply use a reducer like the Curt Reducer Sleeve item # C45405, or do I need to go with a new shank such as the Curt 2.5inch Shank item # C17131? The new hitch is 22inch to the top of the receiver, and the Airstream is 20inch to the bottom of the coupler when leveled as best as I can measure it. Thanks for any help!
asked by: Stephen
Expert Reply:
A reducer like the Curt Reducer Sleeve 2-1/2" to 2" # C45405 will work with your current shank without any loss of capacity. Because there is another moving part, it may give you slightly more noise than using a 2-1/2 inch shank like # C17131 which will give you the 2 inch drop you referenced. If it were me, I'd use the Curt reducer sleeve.
Products Referenced in This Question
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- CURT
more information >
Continue Researching
- Video: Curt Adjustable 2-Ball Mount Review
- Shop: Curt MV Weight Distribution System - Round Bar - 8,000 lbs GTW, 800 lbs TW
- Shop: Replacement Spring Bar for Curt MV Weight Distribution System - 800 lbs TW
- Shop: Replacement Lift Bracket for Curt Weight Distribution Systems
- Q&A: Does The Use of a Reducer Affect the Tongue and/or Trailer Weight Capacity?
- Article: The Ultimate RV Camping Checklist for Your First Year RVing
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Shop: MORryde RV Cargo Sliding Tray - 90" x 33" - 2 Way Slide - 60 Percent Extension - 800 lbs
- Shop: Valterra Wheel Chock - Polyethylene - Qty 1
- Shop: Reese Towpower Wheel Chocks - Up to 17" Wheels - Qty 2
- Shop: Fastway ONEstep Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 24" Long
- Video: etrailer Polyurethane Wheel Chock Review
- Video: Curt Hitch Adapters - Hitch Reducer - C45405 Review
- Search Results: c17051
- Video: Review of CURT Replacement 800 lbs MV Spring Bar - C17072
- Search Results: weight distribution shank drop
- Search Results: 2 12 shank
- Search Results: 2 1 2 weight distribution shank
- Q&A: Recommended Keyless Entry Door Latch for 2017 Keystone Passport Ultra Lite Travel Trailer
- Q&A: Compatibility of Door Locking Latch on a Keystone Travel Trailer
- Q&A: Is It Safe to Tow Cross Country Using a 2-1/2 to 2 Reducer Sleeve
- Shop: Trailer Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: weight distribution hitch
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Brake Controller
- Q&A: Does the B and W Continuum Weight Distribution System Have Sway Control
- Video: Review of Reese Weight Distribution Hitch - 6K WD With Sway Control - RE34FR
- Search Results: wheel chock