Review of Curt Ball Mounts - Fixed Ball Mount - C45460 Video

We measured the distance from the center of the hitch pin hole to the center of the hitch ball and found that measurements was 10-1/2 inches for the Curt Ball Mount for 2-1/2" Hitches #C45460. This ball mount has a 20,000 lb capacity and…

Yes, it will. The etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches item #e98881 will work with both the BulletProof Hitches 2-Ball Mount item #MD206 and your hitch's 3-5/8" wide receiver. To get the etrailer…

The Curt Ball Mount for 2-1/2" Hitches #C45460 does seem to have pretty round corners. Most likely they made it this way so that it can fit in the Ford 2-1/2 inch hitches which are known to have very round corners and hard to fit ball…

EZ Lube spindles are generally preferred over Bearing Buddy setups. The EZ lube allows you to insert grease down the middle of the spindle easily which is basically the best option aside from removing the hub and taking it all apart and cleaning and…

I was able to find the part you referenced, National Oil Seal part number 474276, on an internet search. Please note that this is an oil seal, not a grease seal, and is intended for oil bath bearings. We do offer a range of both types of seals,…

Yes, the B&W 2-1/2 inch to 2 inch adapter part #BWRHXA2182 that you referenced will fit the 2-1/2 inch hitch you have installed on your 2017 Ford F-250.

We have the B and W 2-1/2 inch to 2 inch hitch adapter part #BWRHXA2182 which has two sets of pin holes at different depths to install more flush like you are wanting. One set of the holes was specifically designed for the Ford hitches like you…

The B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 that you referenced does not have a flange that goes around the end of the hitch tube like the factory sleeve adapter has. We don't have any options for hitch reducers that do have the flange…

When you tilt the ball of a weight distribution system rearward on your hitch (toward the trailer) you are changing the physics of the system and therefore also the tension on the rear of the trunnion spring bars. Tilting the head rearward will take…

Based on how tight of clearance there is between the MultiPro tailgate and the rear hitch of the new Chevy trucks I can tell the Curt ball mount part #C43JR would not work with it. Best option is the B and W Tow and Stow part #BWTS20066BMP which was…

For your lifted 2019 Ford F-250, I recommend the B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black #BWTS20049B. It is the best option for your 2-1/2 inch receiver that will give you a drop that will…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…