Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
Question:
Have have ezlube spindles on my boat trailer, can I use bearing buddies or should I stick with the grease caps with the rubber plug? Im not sure if the bearing buddies will work with this spindle set up.
asked by: James G
Expert Reply:
EZ Lube spindles are generally preferred over Bearing Buddy setups. The EZ lube allows you to insert grease down the middle of the spindle easily which is basically the best option aside from removing the hub and taking it all apart and cleaning and re-greasing.
The Bearing Buddies are great for people who don't have EZ lube spindles but since they basically push grease through the front it's not quite as ideal. Also since these are a press in install and they end up pressurized they are known to fall off. Also the zerk prevents the Bearing Buddy from fitting.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 225/75r15
- Q&A: Which is Better an EZ Lube Spindle or a Bearing Buddy Setup
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer hubs
- Video: Review of Progressive Dynamics RV Converters - Power Control Center AC/DC Panel Charger - PD4135K
- Video: Progressive Dynamics RV Power Control Center Installation - 2020 Taxa Mantis Travel Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: bearing buddy
- Search Results: akhd~545~35~g~ez~k
- Video: Hopkins 7- and 4-Pole Trailer Connector Socket Installation - 2020 Chevrolet Silverado 1500
- Article: Overview of Lubricating Grease
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Q&A: How Does Inner Bearing Get Grease When using Bearing Buddy
- Q&A: 168255TB Double Lip Seal on a Kodiak 5 on 4 1/4 3500 lb Axle Disc Brake Kit
- Q&A: How To Find Correct Hubs for 3,700 Lb Axis Products Trailer Axle
- Search Results: spindle nut
- Search Results: #84 spindle
- Search Results: ez lube cap
- Video: Titan Premier Disc Brake Kit Installation
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub - 8-259-50UC1-EZ
- Video: Review of Redline Replacement Trailer Spindle Jam Nut - 6-191
on Trailer Bearings Races Seals Caps
