Curt Welded Weight Distribution Shank Installation - 2017 Chevrolet Silverado 2500 Video

You are not missing anything and you are correct. The Reese Weight Distribution Shank #RP69FR will provide 8.75" of drop. I have included a picture that shows the drop dimensions between each hole.

It sounds like you're wanting a shank to lower your weight distribution head a bit, is that right? If so, you'll first need to see how much drop you'll need. If you click the provided link, you can see an FAQ article that…

For a correct measurement you need to measure the distance from the ground to the top of the receiver opening on your vehicle. You then need to measure the height from the ground to the bottom of your coupler on your trailer when the trailer is level…

For your trailer to tow level using your weight distribution system, I recommend the Curt Weight Distribution Shank 13" Long #C17124. This will provide up to a 10" drop when using round bar weight distribution systems or up to 9" drop…

Since the 2nd Generation Chevy Silverado (2007-2014 model year) has bare wires under the dash for connecting an aftermarket brake controller instead of a connector, the pigtail included with the #RED44FR Redarc Tow Pro Elite would connect directly to…

Yes the Reese weight distribution shank part #RP69FR is perfectly compatible with the Husky brand weight distribution systems.

We have the perfect replacement weight distribution shank for you! The Curt Weight Distribution Shank #C17122 is 18 inches long and from center of pin hole to center of bolt hole is 14 inches. The shank has a weight capacity up to 15,000 pounds and a…

You want to set the ball height adjustment so that the trailer is being towed as level as possible. Sometimes with weight distribution systems the included shank does not provide enough drop to allow this so then you would need to get a shank that…

To pair the Voyager WiSight 2.0 Wireless RV Backup Camera 7" Monitor #ASA27FR with your Voyager WiSight 2.0 Camera #ASA64YR or #ASA74YR you will need to follow the following steps. PAIRING PROCESS This system contains an Auto-Pairing function.…

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

Based on the picture you attached I believe you have a Husky Round Bar Weight Distribution System, for which the correct replacement head is part #HT31516. Typically the only component of a weight distribution system that's interchangeable…

The overall weight of the Replacement Head for Curt MV Weight Distribution Systems #C17075 is 14 lbs. The highest rated system it's used with is the part #C17063 which has a tongue weight rating of up 1,400 lbs.