CE Smith Spare Tire Carrier - Frame Mount - CE27310G Review Video

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which…

The correct replacement hub for your 2005 Karavan KKR-1800-70 is the Easy Grease Trailer Idler Hub Assembly part #AKIHUB-545-2-G-EZ-2K. This hub has a galvanized finish which is best for saltwater and it comes with bearings, races, seal, and grease…

Based on the information and pictures you provided (thank you!) either the etrailer.com 2K Trailer Idler Hub Assembly #AKIHUB-545-2-EZ-2K or the Galvanized #AKIHUB-545-2-G-EZ-2K you referenced would work great as replacements, the only physical…

There is a spare tire carrier that will work for you, the CE Smith Offset Spare Tire Carrier #CE27310G. This carrier fits trailer frames that are up to 3-1/2" wide x 4" tall and holds 4 and 5 lug trailer wheels (4 on 4" as…

Yes, the spare tire carrier #CE27310G can be used on trailer frames that are 2 x 2 inches. It fits frames that are 1 to 3-1/2 inches wide and up to 4 inches tall. And it is compatible with 5 on 4-1/2 bolt patterns.

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

As long as you're able to match your existing bolt pattern with your new wheels, there's no reason to change the hubs on your trailer; there may be instances where the bolt patterns available for your hubs limit you to certain wheel sizes, so…

Yes, the Demco Spare Tire Carrier part #DM15851-76 does work great with the tire size ST235/80R16 that you referenced. We had a customer with your exact tire size send us a picture of it carrying the wheel which I attached.

The Demco #DM15851-76 Spare Tire Carrier you'd looked at wouldn't work for you, as the mounting plate for the tire wouldn't fit inside the wheel. I'd recommend using a simple U-bolt style locking spare tire carrier like #FETCLB0201.…

For the Kenda 215/60-8 Bias Trailer Tire and 8 Inch Wheel, #AM3H320, it measures 18.3 inches in diameter and it is 8.9 inches wide. This is going to have a smaller diameter than a 5.30x12 tire and wheel but it will be much wider, up to about 4 inches…

The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…