Recommended A-Frame Jack with Most Ground Clearance
Question:
I would like to know how long the outer tube extends below the A-frame flange. That is the one dimension that is missing in your great video and data sheet. please measure the length from the bottom of the flange to the bottom of the outer tube. I am hoping it is not less than 3 1/2 inches. Our 4-H utility trailer already has the lower support plate installed. The thickness from the top face of the A-frame to the bottom face of the lower support place face is about 3 1/2 inches. I need the jack to be able to tuck up tight so it doesnt drag on driveway or other steep bends in a roadway or rocks in middle of the roadway. Thanks.
asked by: Jeff
Helpful Expert Reply:
The distance from the bottom of the mounting flange to the bottom of the outer tube on the Bulldog Round, A-Frame Jack part # BD155033 is 3-1/2". The mounting flange is 3/16" thick. I have attached a photo of these measurements for you as well. If you need something with even more clearance then the only other option we have is the Ultimate Trailer Jack part # 322-RDJ-2K which measures 1-3/4" with the jack fully retracted and the collar at the lowest setting.
I have attached a review video of both jacks for you as well.
Products Referenced in This Question
Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 28 Inch Lift
- Bolt-On
- Weld-On
- With Rectangle Foot
- Ultimate Jack
more information >
Product Page this Question was Asked From
Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Topwind Jack
- 15 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Continue Researching
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Shop: Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
- Video: Review of CURT Wheel Chocks - Wheel Chock Set with Trailer Frame Mounting Brackets - C62FV
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Shop: Square A-Frame Jack w/ Footplate - Drop Leg - Sidewind - 28-3/4" Lift - 3,000 lbs
- Shop: Pro Series Round, A-Frame Jack - Topwind - 15" Lift - 2,000 lbs
- Search Results: chocks
- Search Results: a frame jack
- Q&A: Safety Chain Weight Ratings and Dimensions
- Video: Pro Series Trailer Jack - A-Frame Jack - PS1401000303 Review
- Shop: Lippert Quick Drop Tongue Jack - Topwind w/ Drive Nut - 14" Lift - 2K
- Shop: Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Search Results: bd155033
- Search Results: spare mount for trailers
- Video: Bulldog Trailer Jack - A-Frame Jack - BD155033 Review
- Shop: Trailer Hitch
- Video: Ultimate Trailer Jack A-Frame Topwind Jack Review
- Video: etrailer Trailer Jack - A-Frame Jack - TJDA-5000S Review
- Video: Wesbar LED Trailer Utility Light Review and Installation
- Search Results: generator
- Search Results: wiring tester
- Shop: Trunk Bike Rack
- Q&A: How Far Out Does the Pin on the Ultimate Trailer Jack # 322-RDJ-2K Stick Out
- Shop: Bug Shield
- Shop: RV Interior Lighting
- Search Results: utility light
- Q&A: How To Stop A-Frame Jack From Scrapping Ground While Going Over Bumps
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: How To Stop A-Frame Trailer Tongue Jack from Bottoming Out