Is The JR Products Regulator # 37207-30395 A Good Replacement For A Winnetec 6020 Regulator

Question:

Does this jr 37207 come with a preset outlet pressure of 11inch ? The winnetec has a service btu of 210000 and reserve of 130000. Any issues with putting the new reg. with substantial higher BTU #s ? Any idea if the current bracket with the rear double upper and lower are compatible? Thx

asked by: Steve R

Helpful Expert Reply:

The JR Products Automatic Changeover 2-Stage Propane Regulator # 37207-30395 should be set to give you 11" WC straight from the factory. The pressure will still be the same so there won't be an issue with the new regulator having a higher BTU capacity.

I went out to the warehouse and measured the mounting holes and found them to be 3-1/2" x 15/16" from center to center. Depending on the size of that bracket you can always drill new holes to match the mounting pattern of the new regulator. If not then you can also use part # 37207-30405

expert reply by: Kevin C