Review of Brophy Tie Down Anchors - Trailer Tie-Down Anchors,Truck Tie-Down Anchors - TL2B Video

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

The Stake Pocket Tie-Down Anchors #PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down Anchor #TL2B. The ring is a bit larger on the Brophy (3 inches)…

The Brophy D-Ring #RR5K is rated for 5,000 pounds but it depends on what it is mounted to. If the trailer has a steel floor or 2x4 wood floor then it would not be a problem. If it is aluminum you would want to bolt it to a structural crossmember and…

I may have a solution for you, but there is not a tail light that has those exact dimensions. However, if you've measured from the mounting holes on your existing lights, the Bargman #47-54-001 might be the best option since the mounting holes…

We have the perfect solution for you. I'd recommend using the Fulton weld-on drop leg stabilizer jack, part #FSJ1-SJ2. The jack is sold individually, but using two of them would provide 6000 lbs of support which would be plenty, as your trailer…

The usable dimensions of the Brophy Stake Pocket Tie Down Anchor part #TL2B are 7-3/8 inches from the center of the pin hole to the plate that sits on top of the anchor, the width is 3-1/2 inches and the depth of it is 1-1/2 inches. This is designed…

So I went out to the warehouse and measured the stake pocket anchor #TL2B and from the lip to the top of the pin hole is right at 6-3/4". As long as your stake pocket is really only 6" deep these will work just fine for you.

The leaf spring part #e28SR is a 5,000 lb capacity trailer leaf spring that measures 25-1/4 inches long. The biggest factor with picking out leaf springs is to go with the spring that matches capacity first and then length second as hangers can be…

I am happy to tell you that four of the Stake Pocket Tie-Down Anchor - Black Powder Coat - 2" D-Ring - 1,600 lbs #T55B that you ordered will indeed be strong enough to handle the 4,400 lb car you are going to haul. The working load limit (WLL)…

In order to gain additional space between the bumper and the ball I recommend using a ball mount with a long shank. You would not be able to use an extender since the extender will reduce the capacity of the hitch by 50%. We do have one ball mount…

So long as the wooden planks are securely attached to the steel cross beams I see no reason as to why the Erickson Horizontal E-Track part #EM59150 with the Erickson Adjustable Wheel Net part #77314 would not work for you. However, if you are…

I would recommend using the galvanized lag bolts you refer to. Due to the thickness of the floor, I do not think it would be necessary for all the lag bolts to go through the flooring and bolt to the frame, but having the 4 at each end and two in the…