Brophy Stake Pocket Tie Down Anchor Review Video

So I went out to the warehouse and measured the stake pocket anchor #TL2B and from the lip to the top of the pin hole is right at 6-3/4". As long as your stake pocket is really only 6" deep these will work just fine for you.

After 10 minutes of inactivity the Prodigy P3 part #90195 will go into sleep mode which means it basically shuts itself off without losing presets.

The Stake Pocket Tie-Down Anchors #PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down Anchor #TL2B. The ring is a bit larger on the Brophy (3 inches)…

The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer Horizontal…

I have a couple options for you as the SmartStraps Ratcheting Wheel Net with Snap Hooks #348851 will not fit your 33" tire. The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 are designed to fit a tire up to 12-1/2"…

You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track #EM09162 (this is a quantity of one strap but can be ordered in a pair at part #EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track…

I'm going to recommend using the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks #317-18900 as these adjustable straps are going to have the length necessary to fit your D-ring mounts that are set 46" apart. The wheel straps on…

Ideally you'd want the anchor points for a wheel net like the SmartStraps #348851 to be in-line with the wheel, but since these are rated for 3,333 lbs (each) and you're using them for a Jeep you'll be perfectly safe to install them…

Yes. I went ahead and reached out to my tech at Brophy, and he said that as long as you are within the weight capacity of the Brophy Stake Pocket Tie-Down Anchor #TL1B, you can use chains/ratchet binders. It is important to note that each tie-down…

I may have a solution for you, but there is not a tail light that has those exact dimensions. However, if you've measured from the mounting holes on your existing lights, the Bargman #47-54-001 might be the best option since the mounting holes…

I recommend ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks part #317-18900 that allows you to tie down a vehicle with tires up to 33" in diameter and 12-1/2" wide. The p225/55r19 tirees are 28.7" in diameter so this strap…

The D-Rings can be a little out of line with the tires but you still want them fairly close. If this is the case for your car hauler trailer then you can definitely use something like the ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks…