Review of Brophy Lunette Ring - Lunette Ring with 5-Position Adjustable Channel Bracket - BR63ZR Video

I reached out to Demco to get the bolt hole spacing on the Demco Channel Tongue Trailer Coupler #DM13203-52. The bolt holes measure 3/4 in from the top of of the coupler to the center of the hole. This is the same measurement for the distance from…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

The Brophy Lunette Ring w/ 5-Position Adjustable Channel Bracket #BR63ZR is most definitely a weld-on installation and you'll use those holes as a reference point during the installation. A lot of times seemingly random holes like these are…

The Brophy ball mount #BH20 is not too much longer than standard length ball mounts so the extra stress it would put on the trailer hitch would be minimal if at all. As long as the trailer hitch on your 2006 Dodge Ram has a tongue weight capacity…

The difference is the color coding of the wire functions for the two 7-way kits part #54006-057 and #54006-009 that you referenced. The part #54006-009 is going to have the wiring colors that are most common on trailers with 7-ways whereas the…

The Tekonsha Prodigy RF Wireless Trailer Brake Controller doesn't tell us the color coding but does show the corresponding function locations. Based on this, you will use the Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty…

Yes, you will want to use safety chains when using a pintle hook such as #C48007. It is a good idea any way just for safety's sake if nothing else. The other issue is that the laws regarding the use of chains can vary from state to state.…

The Replacement Inner Slide for Demco DA91 Actuators #DM12808-97 you have pictured is only designed to work with the Demco Hydraulic Trailer Brake Actuator #8759121 or DA91 if you go by Demco's part numbers. It has a 3" x 3"…

If the connector portion of the #HM40975-11998 filled up with water it had to have been due to it getting submerged or being installed in an area that gets direct water sprayed on it when traveling in rain. We have never heard of one filling with…

My contact at Titan confirmed that you CAN change out just the inner portion of your Titan actuator ball coupler #T4747220 to convert it to a lunette ring type like #T4748000. The conversion kit you need is part #T4045600183, their Replacement Inner…

The Buyers Products 2-1/2" I.D. Bolt-On Forged Lunette Ring #337BDB12281 is 1-1/4" thick. The overall length is 20" and the width of the lunette ring is 5-1/2" while the draw bar section is 2-3/4" wide.

Pintle hitches and lunette rings are usually found in agricultural applications and I cannot say that I have ever seen one used with a boat trailer. That is not to say that it could not work, it is just uncommon. A more traditional ball style coupler…