Brophy RV and Camper Steps - Truck Camper - SS03 Review Video

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

The Manual Pull Out Steps part #SMFP-2100 that you mentioned are going to fit your 2011 Palomino Puma 27KFQ only when you use the Lippert Outriggers for Manual RV Steps #LC301704. If you need a smaller step you can use #SMFP-2120 instead. The…

The scissor step bracket has two L shaped pins on the inside of the angle iron. Measure the center to center distance between the two pins. You will want to drill two 7/16 inch holes into the tailgate that are the same distance apart as the pins that…

TorkLift GlowStep Camper Scissor Steps - 4 Steps - Aluminum - 20" Wide - 350 lbs Item #TLA7804 has an ideal mounting bracket height of 34-1/2 inches but could still be used at 36 inches. The problem though is that the steps may not reach the…

Since your doorway/threshold height is 36 inches the correct Torklift GlowStep is the part #TLA8004 which has a threshold height range of 32-1/2" - 44" and would work perfectly. I attached an install video for this kit as well as a picture…

The Timbren TFRTT350J will measure 7" from the top of the bracket to the bottom of the rubber spring/jounce. With you having 8-1/2" of space on your 2022 Ford F-250 Super Duty, you will have a 1-1/2" gap between the bottom of the…

I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing…

When fully extended, the Brophy Aluminum Scissor Steps, #AS24, will have a depth of approximately 3 ft and an overall height of 39 inches (see photo). The mounting bracket that is included with the steps is pretty universal, so it could be mounted to…

The TorkLift GlowStep Stow N' Go #TLA7844 weighs just over 30 (about 32) lbs by itself. The TorkLift GlowStep part #TLA7804 and part #TLA7504 both weigh a little over 20 (about 22) lbs each.

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

The width of the overall step of the #AS24 is 24 inches. I attached a picture that shows the dimensions of the included bracket as well. It is 1 inch tall and is 24 inches in length. You would need compare these dimensions to the area you plan to use…