TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - White Bracket
(169 reviews)
Price: $564.69
In Stock
TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - White Bracket
Item # TLA7844
Our Price: $564.69
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (169)
- Q & A (0)
- Photos
TorkLift RV and Camper Steps - TLA7844
- Snap-On Step
- Truck Camper
- 4 Steps
- 20 Inch Wide Step
- TorkLift
- 21-1/2 Inch Wide
- Aluminum
- 7-1/2 Inch Drop/Rise
- Ground Contact
8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height.
Features:
- Pull-out steps make it easy to get into or out of your truck camper
- Scissor design lets you manually collapse steps and fold them up for travel
- Lockable storage bracket keeps folded steps in place during travel - no need to remove steps and store inside camper
- Landing gear creates a stable connection from the bottom step to the ground
- Adjustable legs help to stabilize stairs on uneven terrain
- Large rectangular footplates provide level support and help prevent sinking into ground
- No assembly required - landing gear comes pre-installed on the bottom step
- Retention strap keeps your steps stowed when not in use
- When you need your steps, unhook the strap to release them
- Glow tape creates lighted step surface for safely climbing into and out of your camper at night
- Adheres to sides of step platforms
- Glows in the dark for up to 10 hours with only 5 minutes of light exposure
- White powder coated steel mounting bracket is corrosion resistant
- Aircraft-grade aluminum steps are durable and rustproof
- Built-in SureGrip tread on step surface provides excellent footing
- Stainless steel hinges are bolted together for easy add on, removal, or replacement of individual steps
- Bushing bearings offer smooth action and are longer-lasting that standard riveted connections
- Made in the USA
Specs:
- Entry height: 31" - 42"
- Step dimensions: 20" wide x 8" deep
- Mounting bracket dimensions: 21-1/2" wide x 14-1/2" tall x 8-1/2" deep
- Drop/Rise: 7-1/2"
- Weight capacity: 375 lbs
- Lifetime limited warranty
TorkLift's GlowStep Stow N' Go steps offer stability and adjustability. The built-in landing gear legs let you fine-tune the height of the steps. And they can be adjusted independently of one another to stabilize the steps on uneven terrain, eliminating any wobble.
These GlowStep Stow N' Go steps have a bolt-on mounting base that installs on the outside of your camper. The base provides a strong and stable connection to your camper, and it attaches permanently using the included mounting hardware. When you're ready to roll, just collapse the steps, fold them up, and snap them into the base of the bracket. The stabilizing bracket not only holds the steps in place on the outside of your camper, but it also prevents unwanted movement and rattle. For ultimate security, add on a TorkLift pin lock (TLA7509 - sold separately) to lock the steps to the bracket.
Will Torklift GlowStep Stow N' Go Scissor Steps Work for You?
Scissor steps are typically installed on truck campers. The Stow N' Go scissor steps from Torklift are easy to install and lock into the mounting bracket while on the go. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Stow N' Go scissor steps have a single mounting bracket that attaches to either the camper wall or the truck bumper beneath the doorway. To decide which size you'll need, locate the space available for the mounting bracket on your application and measure the width and height. You will need an area of at least 23" wide and 3-1/2" tall.
Once you have an approximation of where the mounting bracket will go, the spot you chose will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, and it will tell you how many steps you need.
The chart below displays entry height measurements in the first column. The step part numbers with the 21-1/2" mounting bracket width are in the second column.
This page's step assembly is in bold text.
| Entry Height | 21-1/2" Mounting Bracket Width |
|---|---|
| 23-1/2" - 34-1/2" | TLA7843, TLA7833 |
| 31" - 42" | TLA7844, TLA7834 |
| 38-1/2" - 50" | TLA7845, TLA7835 |
| 46-1/2" - 58" | TLA7836, TLA7846 |
How Do You Install the Steps?
To install the steps:
- Find the mounting spot for the bracket on your vehicle
- Unfold the steps and attach to the mounting bracket
- Place the step assembly against the camper or bumper
-Make sure the assembly is centered beneath the doorway
- Mark the mounting holes on the camper and drill
- Remove the steps from the bracket and set aside
- Attach the mounting bracket to the camper
-Secure in place with included lag screws
- Attach the stairs to the mounting bracket and extend
GlowStep Accessories
Add any of these accessories to your Stow N' Go steps for stability, eliminating gaps, or keeping your steps and RV interior clean. The GlowGuide handrail (TLA7621 - sold separately) attaches to the outside of your RV and a bracket on the bottom of the steps. This helps to steady the assembly and adds 25 lbs to the weight capacity of the stairs. The SafeStep vinyl barrier (TLA7602 - sold separately) easily fastens with Velcro strips in between any 2 steps. This prevents your or your pets from accidentally slipping between steps. The DirtDestroyer boot brush (Tla7603 - sold separately) affixes to the bottom of the steps so you can scrape your shoes before climbing into your RV.
A7844 Tork Lift Glow Step Stow and Go Scissor Steps for Truck Bed Campers - 4 Stairs w/ Landing Gear
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - White Bracket - TLA7844
Average Customer Rating: 4.8 out of 5 stars (168 Customer Reviews)
8" x 20" Aluminum steps are designed for truck bed campers. Steps mount on camper and don't need to be removed for travel. Easy deployment with retention strap. Landing gear legs offer maximum stability and let you fine-tune the height.by: Greg07/28/2023
These scissor steps make a huge difference for us to safely and easily enter our camper whether it is on the truck or not. I did modify one thing. The gap between the top scissor step and the truck landing was too wide and I was concerned we might step through the opening. I rectified this by attaching one of the original steps to the landing which gave an extra step and took up the space between the top scissor step and the landing. Attached pictures show this modification. The steps still fold nicely to the Arctic Fox Landing while traveling and attacing the steps to the side gave easy reach to the ladder for stability until I reach the handle on the camper itself.
by: Shaun 02/26/2024
These steps are a game changer! Very sturdy and installation was fairly easy. Fellow truck campers, ditch the bounce of factory steps or the use of a step ladder and get these!
by: Jesse P09/15/2023
Very well made with "extra" hardware to cover the many different installation possibilities. These take a lot of stress out of using our camper.
If getting into your camper is a challenge, I highly recommend these.
by: Michael05/20/2020
I’ve never been disappointed with a Tork Lift product, I have their Camper tie down kit AND the Stable Loads on this truck, so putting the Glow Steps on was a no brainer. etrailer had the best price, free shipping and the order process was simple. Arrived a day earlier than I expected!
Easy install, solid set of steps, completely changed the access dynamic of our truck camper. I’d buy again.
My only request would be that Tork Lift would make the bolt holder/fisher tool about 2’ longer as I installed on a bumper that only opened on one end.
by: Manuel03/10/2021
Shipping was fast and free, thanks etrailer.
I’m extremely happy with these scissor steps. They are strong, sturdy and very easy to install.
Simply mount the back plate and slip in two pins.
by: Mike02/17/2022
The folks at etrailer were extremely helpful and friendly. I made a mistake ordering a part and they took it back no questions asked. They helped me get the right part. One delivery was early and the others on time. I will buy all my truck and camper components from them!
by: Eric 10/05/2022
Best Set of Steps by far.
I've used three separate types of steps and these are the most solid and easy to use, the contact with the ground is a game changer.
Eric
10/6/2023
Still a fantastic set of steps a year later…
by: Christopher04/13/2019
Stow n Go steps arrived quickly and packaged well. Installation was super easy and only took a few minutes. I love the adjustable legs for uneven terrain.
by: Lisa05/14/2019
At first wasn’t sure how the 4 steps would work when Camper was off the truck. Called Torqlifts support line and Todd explained it would be like a ladder. Works excellent as a ladder off the truck and pulled completely out as steps while on the truck. Very satisfied with our purchase quality you’d expect built in the USA.
by: George01/08/2020
Fast shipping, product was very easy to install and functions perfectly.
Thank you!
George and Tami
by: John 08/12/2022
Excellent product.
John R.
8/13/2023
Excellent product, even better since we have added the handrail for the stairs
by: Jill11/10/2020
We purchased these one year ago and rank them in our "Best Life Purchases" category. Quick and easy to deploy and store and to clean. We carry a few jack pads with us to help level them if the ground slopes away. Also, with the added pet covers between the rungs, our dog goes up and down without hesitation or fear. In the event that we offload our truck camper and lowered to the ground, these steps can be quickly detached from the bracket so that a step stool can be used instead. As for buying from eTrailer, we give them 5 stars as well. Product shipped quickly and securely. Customer service is excellent!
by: Alex03/25/2022
The stairs are okay. Shipping was absolutely horrid. They arrived with the box open, no packing material. A bolt is actually missing from the stairs, they were so banged up they appears to be used.
Jenny N.
4/2/2022
I will have our Customer Service team reach out to you.
Jan
7/15/2022
Everything was fine
by: James10/12/2018
This thing is extremely well built. It doesn't feel rickety at all. It supports my 280 pound body easily. I have the fox landing on my truck camper arctic fox 990. The bracket was about 4 inches longer than the side of the landing. I used the existing tapped thread hole in the landing . The other 5 bolts i had to drill out them used all the stainless bolts included in the kit to make a solid 6 bolt connection. I even used the other 2 tapped bolt threads with large washers just because they were there but with the 6 bolts it's more than plenty to keep this firmly mounted. I'll probably just pull them out Since their really not supporting anything. The adjustable legs are easily adjusted for ground height. You can buy locks for them but really that's just gonna keep the honest people from stealing your stuff. It just takes a couple nuts getting removed and your steps walk off but i doubt that would happen.
by: Mark 09/18/2019
I love these steps. They were very easy to install. They are easy to pull out. Easy to remove. I couldn’t ask for a better set of steps
Mark
9/18/2020
They were easy to install and they are still performing like brand new. I really love them
by: Greg 09/15/2021
Very nice product. We were unable to get into our truck camper as the camper and truck are tall. Steps are sturdym easy to deploy and ddo glow in the dark. A great addition to our rig.
Thanks, Greg
by: Rob09/04/2020
Mounted this step on our truck camper. We use a F-450 and the truck camper sits up pretty high, this step makes walking in and out much easier. The quality of the step is excellent and etrailer has the best pricing and customer service.
by: David09/15/2018
Impressive build quality. I have seen other products that appear flimsy and detract from the camper appearance. These steps are very easy to use, easy to maintain, and certainly add to safety on a Arctic Fox, basement style camper. etrailer is by far the best source I have found for major RV products given the excellent service and quick delivery.
by: Charles 06/22/2020
The rubber buttons on the bottom of the feet come off very easily. Had to tape them on. The mounting pins should be much bigger so you could drill holes and lock the steps to the bracket. Too easy to steal them. Otherwise very well made.
by: Mark01/25/2022
Good quality, heavy duty construction.
Unfortunately the shipping packaging wasn't sufficient. Luckily it wasn't damaged too much but the hardware bag ripped and I the entire bag of bolts and screws where all over the box and some of the contents fell out of the box. I had bolt at home that worked but this would be a problem for others. Simply packaging this better would have made this a five star product.
Jenny N.
1/25/2022
I will have our customer service team reach out to you.
by: Keith 01/02/2022
This step gives my wife and I more stability entering and exiting our truck camper. Add a bigger security handle to make it even better.
by: Terry 05/15/2021
These steps are wonderful. they are very sturdy, look good, and clean easily.
On our camper the only complaint would be a good size gap at the very top, I had to cut a piece of wood to close the gap so I a foot wont fall through.
by: Vera06/24/2022
I really like these steps they were easy to install on my Lance camper and easy to extend when needed.
by: Bob 08/15/2021
Installed on a Lance 850. Had to change hole pattern a bit but an easy fix.
Fast installation sturdy wide steps
Dogs luv them Another great Torklift product
25
169
Show More Reviews
See what our Experts say about this TorkLift RV and Camper Steps
- Could Torklift GlowStep Scissor Step Fit 2018 Lance Truck Camper 825What's the entry height of your Lance? I am sure we have a set of the Torklift Glowsteps that will work but we need to know for sure the entry height to pick out right size. For example, the part # TLA7844 fits the height range of 31-42 inches. And the part # TLA7845 fits the height range of 38-1/2" - 50".
view full answer... - Can TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 work with Entry Height 36 inchYes, since the entry height range of the TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 is 31-42 inches it would work great on your height that is 36 inches as that falls within it's range easily.
view full answer... - Compatibility of TorkLift Glow Steps with Fox Landing Entry Platform for Truck Bed CamperGiven that the mount of the Torklift # TLA7844 is 2-1/2 inches wider than the available spot on the landing, these particular steps wouldn't be the best choice. CR Brophy makes a narrower 4 step unit, part # AS04 that would be a better choice. This set measures 17 inches wide and would fit your fox landing much better. According to Torklift, you could use the # TLA7844 on the rear edge of the fox landing, but the bracket would protrude past either edge by 1-1/4 inches and you'd need to...
view full answer... - Difference Between Glowstep Stow n Go Steps and Revolution StepsEssentially it's how the two scissor steps store. The part # TLA7844 stores more like a traditional scissor step seen typically at the back of truck bed campers while the # TLA8004 stores more like what is seen on the side of campers. Since you have a Grand Design Reflection 337rls the part # TLA8004 would be the better option.
view full answer...
- How Far Out Does TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 ExtendThe TorkLift GlowStep Stow N' Go Scissor Steps # TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.
view full answer... - TorkLift GlowStep Stow N' Go Scissor Steps for 2020 Lance 650 Truck CamperFrom what you have described the TorkLift GlowStep Stow N' Go Scissor Steps, # TLA7844, will match your needs. This is for entry heights between 31" and 42". It will set within your door sill width with just under 2" on each side, that is good fit. Please note the link to product review video.
view full answer... - TorkLift GlowStep Scissor Steps For a 9.6 BigFoot Slide In Truck CamperThe TorkLift GlowStep Revolution Scissor Steps # TLA8006 are designed to replace the fold out style steps most commonly found on 5th wheel type trailers. For your BigFoot truck camper you would want a system like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7846 which is also a 6 step unit like the one you found. This is designed for an entry height of 46-1/2" to 58" tall and is designed to mount on the outside of the camper just below the door. The steps will snap...
view full answer... - Weight Capacity of TorkLift Steps Part # TLA7844, Part # TLA7804, and Part # TLA7504The TorkLift GlowStep Stow N' Go # TLA7844 weighs just over 30 (about 32) lbs by itself. The TorkLift GlowStep part # TLA7804 and part # TLA7504 both weigh a little over 20 (about 22) lbs each.
view full answer... - How to Determine Fit of 4-Step GlowStep Stow N Go Camper Steps on Fox Landing StepsYou may be able to use the TorkLift GlowStep Stow N' Go steps, though it is going to depend on the width of the area you are looking to mount them. You'll want to take a measurement of the mounting area width to determine if the mounting bracket will fit. According to TorkLift, the GlowStep Stow N' Go does require a 23" wide and 3-1/2" tall area for the mounting bracket, with the bracket itself measuring 21-1/2" wide. If you do have that space you can use the 4-Step GlowSteps: - Black...
view full answer... - Comparing The Brophy # AS24 And Torklift # TLA7844 For Truck Bed Camper With Limited Mounting SpaceNot following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will work with your application. I called Brophy and the warranty for their steps is a 1-year warranty. As for connecting the landing gears of the TorkLift GlowStep # TLA7844 to the Brophy Camper Scissor Steps # AS24, this is something that we would not be able...
view full answer...
- How To Mount TorkLift GlowStep Stow N' Go Steps To Camper With 9" Deep BumperI may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7843 away from your camper to clear your bumper. It may be possible to have a local fabrication shop make a custom bracket for your application. Instead I recommend installing the # TLA7843 to the bumper of your camper as shown in the included pictures, this will allow you to still use the step, but will not require a custom...
view full answer...
- Truck Camper Scissor Step Recommendation that Stores on Camper with 3 ft 1 in HeightFor a set of camper steps that fit the doorway height you mentioned of 37 inches you would want the Torklift GlowStep Stow N' Go Scissor Steps # TLA7844 which fits your doorway height as well as stores permanently on the rear of the camper.
view full answer... - Can Stow N' Go Scissor Steps be Installed on Camper Without a BumperWhile we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would need to remove your current bracket and it would require a 19.5" x 3.5" mounting area below the door. The mounting bracket for each of these steps is 21-1/2" wide x 8-1/2" deep but its height is going to differ depending on the model you...
view full answer...
- Picking Out Torklift 4 Step or 5 Step Glowstep Setup for 5th WheelThe way to pick out the correct Torklift Glowstep is to go by the height from the threshold of the door down to the ground. Since you mentioned 3 feet the 4 step # TLA7844 is most likely what you need as it has a height range of between 31 and 42 inches. 3 feet is 36 inches. If you can get me an exact number though I can verify for sure what you'd want. The 5 step version part # TLA8005 has a height range of 39-1/2 to 52 inches.
view full answer... - Does the TorkLift GlowStep Stow N Go Scissor Steps w/ Landing Gear Have a Quick Disconnect Feature?What I think you are asking is if the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, # TLA7844 has a latching connection or some type of quick disconnect feature to remove from the camper. They do not have what I would call a quick disconnect, but they do have a bolt-on mounting base that installs on the outside of your camper and these can be removed/installed from this point.
view full answer... - Can Torklift GlowStep # TLA7844 Replace Single GlowStepBased on the picture you sent in of your 2021 Northstar Arrow U 8.5 you have a Glowstep so the Torklift GlowStep part # TLA7844 would easily fit in the same bracket and work well. This specific step was designed to fit a threshold height of 31 to 42 inches so as long as that also matches what you have on your camper this would work great too.
view full answer...
- Availability of Truck Camper Steps That Fold Up On BumperWe have the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear like part # TLA7844 which fold up and install on the bumper, but I'm not aware of any options that would flip up like the Lippert SolidStep ( # LC791574 for reference) and install safely on a truck bed camper. I really like the TorkLift because they system is easy to use and offers one of the most stable step options on the market. Another plus is that the way these are designed they can basically be deployed on any...
view full answer... - Which Torklift Glow Step for Bumper Height of 32 inchesFor your bumper height of 32 inches you'd want the 4 step version part # TLA7844 as it has a bracket height of 35-3/8 inches. The 3 step version part # TLA843 has a bracket height instead of 27-7/8 inches so it would not be an ideal fit.
view full answer... - Recommended Steps for a 2019 Palomino Backpack HS-8801 Truck Bed CamperI do have an option for you but the SolidStep Manual Fold-Down Steps are not a good fit for your 2019 Palomino Backpack HS-8801 Truck Bed Camper because they do not make any that will fit your 22" wide doorway. Instead, I highly recommend the TorkLift GlowStep Stow N' Go Scissor Steps part # TLA7844. The above GlowSteps are for an entry height of 31" - 42". They are made right here in the USA and have a unique set of adjustable legs that are very stable. They also have glow strips which...
view full answer... - Which TorkLift GlowStep Stow N' Go Scissor Steps Fits 2019 Grand Design 337RLSSince your door entry height is 35 inches the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7844 that you referenced is the correct fit as it has a height range of 31 to 42 inches. The individual steps are a bit smaller than what you have as they are 20 inches wide and 8 inches deep but this would still work great on your 2019 Grand Design 337RLS!
view full answer... - Can Step be Added to TorkLift GlowStep Stow N' GoYou are correct the Single Add-On Step for TorkLift GlowStep Kits # TLA7801 is the correct part to add a step to the TorkLift GlowStep # TLA7844 that you also mentioned.
view full answer... - Recommended Scissor Steps for Truck CamperThe TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7844 is an excellent option for your camper. It will give you 4 steps up to your bumper and have a mounting bracket height of 35-3/8". This will enable you to mount it directly to the rear face of your bumper once your current TorkLift step is removed. These steps include landing gear which make them more solid and able to accommodate uneven terrain. The Glow tape makes the steps easy to see at night while the built-in...
view full answer...
- 4-Step Camper Stair Recommendations for Bracket Height of 34-1/2 InchesTorkLift GlowStep Camper Scissor Steps - 4 Steps - Aluminum - 20" Wide - 350 lbs Item # TLA7804 has an ideal mounting bracket height of 34-1/2 inches but could still be used at 36 inches. The problem though is that the steps may not reach the ground. You could go with Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs Item # AS24 which are 39 inches tall when fully extended. Or another option is TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing...
view full answer...
Do you have a question about this RV and Camper Step?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Halie H
Updated by:
Isabelle B
Updated by:
Noah M
Written by:
Amanda M
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike
2/18/2023
I’m very happy with the several products I purchased. Very well made and priced right. I was very happy with customer service and support. Extremely knowledgeable employees.