4-Step Camper Stair Recommendations for Bracket Height of 34-1/2 Inches

Question

Question:

I have 36inch rise from ground to bottom of door. What I read is 34-1/2inch on four step unit. Will four step work?

asked by: Sam

1

Helpful Expert Reply:

TorkLift GlowStep Camper Scissor Steps - 4 Steps - Aluminum - 20" Wide - 350 lbs Item # TLA7804 has an ideal mounting bracket height of 34-1/2 inches but could still be used at 36 inches. The problem though is that the steps may not reach the ground.

You could go with Brophy Camper Scissor Steps - 4 Steps - Aluminum - Non-Slip Tread - 24" Wide - 300 lbs Item # AS24 which are 39 inches tall when fully extended.

Or another option is TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 350 lbs - White Bracket Item # TLA7844 which has landing gear so the steps would be supported at the ground.

Honestly I would go with a set such as # AS24 because you never know when you might need the extra few inches.

expert reply by: Michael H

1

Answer 1

What I think you are asking is if the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7844 has a latching connection or some type of quick disconnect feature to remove from the camper. They do not have what I would call a…

view full answer...

Answer 2

Since your doorway/threshold height is 36 inches the correct Torklift GlowStep is the part #TLA8004 which has a threshold height range of 32-1/2" - 44" and would work perfectly. I attached an install video for this kit as well as a…

view full answer...

Answer 3

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 4

If you're having trouble getting access into the bumper when installing the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 you'll simply need to drill an access hole large enough to fit the bolts through and then you…

view full answer...

Answer 5

I spoke to TorkLift about the issue you're having with the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 and they informed me to inform you to tighten the hinge tension on the side that's sagging. I have attached for you below…

view full answer...

Answer 6

The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.

view full answer...

Answer 7

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

view full answer...

Answer 8

The Torklift steps part #TLA7834 would be your best option. These steps have a height of 35-5/8 inches from where they mount down to the ground when folded out so this would match your 35 inch dimension perfectly.

view full answer...

Answer 9

Depending on where you wanted to mount the Aluminum Scissor Steps, #AS03, you would use the included mounting bracket, which you can see in the fourth picture on the product page. Click on it to enlarge the picture. The bracket attaches to your…

view full answer...

Answer 10

The bracket of the Aluminum Scissor Steps #AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling. Check out the review video I attached for these steps as well.

view full answer...

Answer 11

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 12

The Brophy Camper Scissor Steps - 4 Steps in aluminum, #AS04 has a shipping weight of 21 lbs. The Brophy Camper Scissor Steps - 4 Steps - Steel, #SS04 is 34 lbs.

view full answer...