Review of Brophy Camper Jack - Truck Bed Camper Jack - CJ41 Video

We've got what you're looking for. The Curt Front Mount Hitch Receiver, part #C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the…

The best priced pair of camper jacks we offer is the part #CJ31. If you needed a total of 4 of these jacks you'd need to order a quantity of 2 of these.

Manufacturers do not list the parts they use so you would need to remove the inside portion of your entry door lock to measure the size of the cutout hole. The Global Link Ultra E Pro Electronic Lock for Travel Trailer #295-000185 you referenced…

The Brophy Cable Camper Jacks - 57" Max Lift Height - 3,000 lbs - Qty 2 #CJ41 would require two sets of jacks to lift your 4,500 lb truck bed camper and that application will absolutely work. The issue is the dually rear axle will cause that…

Thanks for reaching out! Since the only difference between your 265/70-17 and 265/65-17 tire sizes is that the former has about 1" more diameter I think it's safe to say that a chain currently fitting on your 265/70 will also fit your…

Yes, the Brophy Cable Camper Jack #CJ74 (2 jacks) or #CJ74H (single jack) does come with everything you need to jack your camper up out of your truck.

Yes, I cannot speak for our competitors but I can assure you that the Brophy Cable Camper Jacks part #CJ41 do come with the upright poles and all of the other parts you will need to lift your truck bed camper on and off your truck. The components…

You should not have a problem with the camper sliding out when you are using any of the Brophy Cable Camper Jacks. The jack is very stable because of the tripod base. That stability will make the jack very difficult to tip to the front or the back.…

I was able to reach out to my tech contact over at TorkLift to get some guidance on the installation of the TorkLift Front Tie-Down #TLF2022 for you. He mentioned that you'll want to apply pressure to the tie-down (pull it down a little bit) or…

Yes, Brophy has recommended the #HSSF for trucks with aluminum beds like yours so this would be a great option. For a hardware kit you would need the #TDHP.

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the #TLF2021 and #TLF3008 that you referenced!