How Does Gen-Y Torsion Adjustable Ball Mount Compare to Weight Distribution System

Question

Question:

How does this compare with a weight distribution and anti sway hitch mechanism? Better?

asked by: Darren B

0

Expert Reply:

The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1324 that you referenced doesn't have the same features as weight distribution or sway control so it's hard to compare them. It will cushion the ride quality when you are towing but it won't distribute tongue weight up to the front axle of the tow vehicle like a WD system does and it won't really minimize sway like a sway control system would. So it depends on what it is that you are looking for.

If you have a higher capacity tow vehicle that doesn't necessarily need weight distribution and you aren't experiencing sway this will give you a smoother ride quality and oddly enough will slightly improve fuel mileage as well. It's also much easier to connect and disconnect from than a WD system.

If you wanted the best of both worlds from a weight distribution system and the Gen-Y we have the shank # 325-GH-1302 that has the same cushioning as well as the adjustment shank holes that are compatible with the heads of other systems.

I also attached a link to a review video on this for you to check out too.

expert reply by: Jameson C

0

Answer 1

The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…

view full answer...

Answer 2

Yes. You can use your existing weight distribution hitch with the Gen-Y Torsion 2 Ball Mount #325-GH-1324 without any additional components, but it is not the optimal setup. Gen-Y recommends that you use the Gen-Y Torsion Weight Distribution Shank -…

view full answer...

Answer 3

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 4

The B&W Ball and Safety Chain Kit #BWGNXA2061 is going to be the kit I recommend. This kit includes a 2-5/16" hitch ball that is rated for 30,000lbs. The reason I prefer this kit is that it has the folding handle that is used to lock the…

view full answer...

Answer 5

The Curt #C38CR 38K capacity gooseneck ball removes from the hitch itself by flipping up the center latch, then rotating it. This takes the spring tension off the ball bearings that hold the ball in place, allowing the ball to be easily lifted out…

view full answer...

Answer 6

I prefer the Furrion AC units over the Advent Air ones as they tend to blow colder air. For a single unit I'd go with the 15k BTU part #FR58PR which is for non-ducted applications like your enclosed trailer.

view full answer...

Answer 7

The Curt Rebellion #C57UR XD Shock Absorbing Ball Mount is manufactured in China. If you're looking for something made in the USA, I'd recommend a Gen-Y shock absorbing ball mount for a 2-1/2 inch receiver like #325-GH-514 which provides up…

view full answer...

Answer 8

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

view full answer...

How Does Gen-Y Torsion Adjustable Ball Mount Compare to Weight Distribution System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching