Trailer Brake Controller Installation - 2008 Toyota FJ Cruiser Part 2 Video
Customers compare etbc7 to these similar products
Products Featured in this Video
How to Install a Brake Controller for a Trailer on a 2008 Toyota FJ Cruiser Part 2
All right next what we need to do is run this wire up to the front side of the vehicle up by our fire wall. Basically we just have to keep this as close to the frame as possible away from the exhaust and also as far to the left as possible to keep it away from the steering arm too. We have got our wire pulled through on the top here but we need to get to the left side as far as possible so push it… see more >
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
John A
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Installed by:
Cole B
Video by:
Alan C
Video by:
Zach D
Video by:
David F
Video by:
Michael B
Video by:
Aidan B
Video by:
Thomas T
Video by:
Bradley B
Video by:
Ethan H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Explore Expert Info
![Our Expert]()
Most Popular
Most Popular
