Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
RV sewer valves like the Bristol #34466NDHR19AAA that you referenced are the same valves used by many of the OEM's including, sometimes, Winnebago. We do not have the ability pull build sheets and know exactly what part was installed on…
view full answer...It is a 3-way switch. The SeeLeveL RV Holding Tank Monitoring System, #SE39VR includes a panel that incorporates readings for sensors to track 3 holding tanks, display of battery voltage and includes water pump switch. The integrated switch…
view full answer...The correct spigot flange for the Valterra Bladex Waste Valve Body for RV Gray Water Tank part #T1001VP is the Valterra RV Sewer Spigot with Flange part #T1006-1.
view full answer...No, the SeeLeveL RV Holding Tank Monitor #SE84VR does not include the sensors. The sensors are sold separately. - SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR (12") - SeeLeveL Sensor for RV Holding Tank Monitor #SE27VR (16")
view full answer...Amps times volts equals wattage so with the RV Holding Tank Heater #372HTH-A pulling 1 amp at 120v you'd get 120 watts.
view full answer...I went out to the warehouse to measure Valterra RV Sewer Spigot with Flange - 1-1/2" Item #T1006-1 for you. The holes are spaced 2-7/16 inches apart on center up and down and side to side. Diagonally they are space 3-7/16 inches apart on center.…
view full answer...We do have the SeeLeveL RV Holding Tank Monitor #SE84VR which monitors fresh, gray, black, and galley tanks. This is the closest we have to your fresh, galley, bath, and black tanks. Your bath would just be labeled gray instead of bath. This monitor…
view full answer...For back up cameras that use the factory wiring in your 2021 Ford F-250 we have the Custom Third Brake Light Camera for 8" Factory Monitor #3460001 if you have the 8" monitor in your F-250 or the Custom Third Brake Light Camera for…
view full answer...No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part #34466N4BB96GM, needs ABS solvent cement, part #3447530889, to secure the valve to your sewer…
view full answer...Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump and heater switch, #SE74VR is designed specifically to be a replacement for older tank monitoring systems. The SeeLeveL #SE74VR uses sensors that are sold separately for…
view full answer...The SeeLeveL RV Holding Tank Monitoring System, #SE39VR operates from a 12 VDC power source. The installation consists of mounting the display inside the RV, cutting and fastening the senders to the sides of the holding tanks, connecting wiring, and…
view full answer...Since the Tuson Electronic Sway Control System #335TSC-1000 will activate either side of the trailer brakes as needed to stop sway and the Curt True Course #C94VV instead applies them both at the same time and does a better job sensing and stopping…
view full answer...Related Searches
Filter Your Search
Contact and Help