Review of etrailer E Track - E-Track Rails - e52VR Video

This question is refined by several decisions. What will you use for tie down points on the Corvette? What will you use for tie down points on the trailer? How easy do you want it to be. Finally, what looks good. If you are OK with climbing under…

The E-Track like the #e52VR is made from a 12 gauge steel which is 2.5 mm thick. The e-track can safely handle 2,000 pounds per track. So if you put down two tracks it would go up to 4,000 pounds, unless you use the shorter 2 foot e-track. I attached…

The manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, #EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a tie-down strap.…

Since you have wooden floors in your trailer the hardware I would recommend for installing e-track like the part #EM19147 would be the Erickson Hardware kit part #SL49FR which is basically wood screws.

Erickson E-Track should be secured to the mounting surface with no fewer than 2 fasteners per linear foot per side, so for example a 3-foot section would need no less than 8 fasteners. The type and length of fastener depends on the mounting surface…

The Erickson E-Track Trailer Cargo Control tracks, #E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport.…

When mounting vertical e-track, like #E19146, the type of hardware used will depend on what the material of the surface is made of that you are mounting the e-track on. If you are mounting tracks on a standard plywood surface then you could you 1/4…

Your setup would be totally fine. Especially considering this is a bed application where the force will be straight down. Every third hole on the metal side and every other on the wood would be more than adequate and would be super solid.

Good question and the 2,000 lb working load limit (WLL) of the Erickson Horizontal E-Track such as the 5 foot #E19148 is the safe limit for the weight of the cargo the track is helping secure. To simplify, it is the cargo capacity that the track can…

You can use the Erickson ATV E-Track Tie-Down Kit #EM09160 to help secure your ATV but you really need something securing your ATV in the direction of travel. You could put some Horizontal E-Track like part #E19148 in-line with the direction of…

To secure an ATV with 32" tires to a trailer a few components are needed for worry-free transport. The Erickson Horizontal E-Track part #EM59150 is a great system for securing a variety of items, not just your RZR. For your specific need, a set…

The strap length on the ratchet side of the Erickson E-Track Strap with Ratchet part #EM59136 is 5-1/4 inches.