CargoSmart E-Track and X-Track System Board Holder Review Video

Basically you will want to compress the spring part #BD500354 so that you can position it in place on your Bulldog Coupler. I attached a picture that shows where the spring installs at. It will just be a matter of compressing the spring to get it…

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36"…

There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the CargoSmart…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I attached a chart that has all of the recommended lug nut torque specs for trailer wheels. Based on your studs being 1/2 inch, your wheels being 15 inches in diameter, and your lug nuts being coned you would want to torque your lug nuts to 90-120 ft…

We have a couple different options available for a spare tire mount inside your cargo trailer. - Rack'Em Spare Tire Rack for Enclosed Trailers #RA-16, this includes (1) spare tire holder but has the ability to hold additional tires with the…

Aluminum is a pretty soft metal. Especially as thin as you mentioned. I wouldn't recommend self tappers for the e-track. Instead I would recommend appropriately sized nuts and bolts on either side of the track with larger washers.

The width of the Optronics Flexible LED Light Strip #UCL90CB is about 3/8". I have attached a review video where we take this measurement for you to check out. To help remove the 3M adhesive I recommend using some heat like a hair dryer or…

From the pictures you sent in, it looks like the hinge assembly itself rusted through and ripped off. It seems like it may have been fabricated by the previous owner. That latch style is usually accompanied with a bar like with the Cam-Action…

To install an 8-foot length of Erickson E-Track #E19135 inside your enclosed trailer I do recommend first mounting some plywood to your interior wall studs. A piece of plywood that is larger than the E-Track's 5-1/8-inch width will spread the…

The longer the ramp, the less likely it is to drag or scrape. Ideally we have the perfect mixture of length and angle. I think using the ramps you were looking at #RR-RACK-4 won't be enough length and too much angle. The ramps you were looking at…

For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.