Recommended MaxxAir Roof Vent Covers For a 2022 Tiffin Phaeton 37BH Motorhome

Question

Question:

Im a bit confused by all of the options. What I am looking for are Maxx Air covers for my stock vents on a 2022 Tiffin Phaeton 37BH that also include screens and clips so they can be cleaned. I would like the version that protects aganst rain and such.

asked by: Neal D

0

Expert Reply:

I recommend the MaxxAir FanMate RV and Trailer Roof Vent Cover for your 2022 Tiffin Phaeton 37BH. These covers are available in Black # MA00-955002 to reduce light from entering and match other black roof fixtures, Smoke # MA00-955003 to allow light in while blending in well with roof fixtures and a White # MA00-955001 which will match with white roof fixtures and will still allow light in. While these are easily installed on MaxxAir fans like the Plus # MA00-04002K with the roof clips it can also be used on other fans with the included hardware.

A Bug Screen # MA00-955202 can be installed on the replaceable Black # MA10-955102 and White # MA94FR Louvers to make cleaning easier and keep bugs out from inside the cover.

expert reply by: Bud M

0

Answer 1

This is a common question about this (and other) vent covers. None of the covers are tall enough for a vent lid to open 100%. However, most, including the Fan-Tastic #FVU1500WH, will open most of the way and allow 100% of air flow produced by the…

view full answer...

Answer 2

MaxxAir's fan/vent covers are universal, and trailers - including your 2023 - use a standard 14" x 14" vent that these covers will fit right over. So you can use any of the following, depending on the color you are looking for: - White:…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 6

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 7

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 8

For the front legs of a Lippert Ground Control 3.0 kit the replacement front jack leg solution you'd need is the part #LC362485. This will allow you to reuse your current motor and bracket. There isn't a gear replacement kit for the jack…

view full answer...

Answer 9

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...

Recommended MaxxAir Roof Vent Covers For a 2022 Tiffin Phaeton 37BH Motorhome

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching