Recommended In-Bed 7-Way Connector for a 2024 Chevy Silverado 2500

Question

Question:

Looking to add an in bed hook up for my 5th wheel. 2024 Chevy Silverado 2500.

asked by: Bruce

0

Expert Reply:

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item # C58FV. This harness puts a 4-way and 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient.

expert reply by: Jerred H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will actually be needing the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #HM54FR for your 2021 Chevrolet Silverado 2500HD. This will ensure you have the correct wiring and length needed to install in your truck bedside. The…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

I have several options for you but none of which include both the air bag kit and the air compressor. Therefore, you will need to purchase an air bag kit specifically designed to fit your 2016 Ford F-250 in addition to an air compressor kit. The Air…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

You can definitely connect a 5th wheel wiring harness to the bumper 7-way on your truck. The second in-bed 7-way connection is simply to give an easy access point and clean look. It keeps the wiring from dragging or moving against your tailgate, so…

view full answer...

Answer 7

I highly recommend the 30K Curt PowerRide #C74BR for the puck system in the long bed on your 2024 Ram 2500. This is the aftermarket version of the OEM Mopar hitch, has one of the highest weight ratings at 30K, and is a high-performance hitch when it…

view full answer...

Answer 8

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 9

According to my research the following wires for the 7-Way on your 2019 Chevy Silverado 2500 should carry the following functions: Green OR White/Green - Reverse White - Ground Blue - Brake Controller Green OR Green/Purple - Right Turn/Stop Red/Black…

view full answer...

Answer 10

Yes, it will. The Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV puts a 7-way and 4-way connector in the bed of your Silverado and allows you to keep the one on your bumper. This makes hooking up to your…

view full answer...

Answer 11

The best spot to install the Trailer Connector is on the bed sidewall on the drivers side, between the wheel well and the tail gate. We have an installation video showing this Curt 5th Wheel and Gooseneck Wiring Harness #C56000 being installed on a…

view full answer...

Recommended In-Bed 7-Way Connector for a 2024 Chevy Silverado 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching