MaxxAir FanMate Vent Cover For 2023 Trailer

Question

Question:

Hi, I have a 2023 Apex BHS300 RV trailer. Looking for a Maxxair fan cover. Would you happen to know dimensions for appropriate cover to purchase? Have not had a chance to measure test yet. Thanks!

asked by: Yosuan M

0

Expert Reply:

MaxxAir's fan/vent covers are universal, and trailers - including your 2023 - use a standard 14" x 14" vent that these covers will fit right over. So you can use any of the following, depending on the color you are looking for:

- White: MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001

- Black: MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002

- Smoke: MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003

expert reply by: Kyle S

0

Answer 1

This is a common question about this (and other) vent covers. None of the covers are tall enough for a vent lid to open 100%. However, most, including the Fan-Tastic #FVU1500WH, will open most of the way and allow 100% of air flow produced by the…

view full answer...

Answer 2

I recommend the MaxxAir FanMate RV and Trailer Roof Vent Cover for your 2022 Tiffin Phaeton 37BH. These covers are available in Black #MA00-955002 to reduce light from entering and match other black roof fixtures, Smoke #MA00-955003 to allow light…

view full answer...

Answer 3

Since your vent cover goes up higher than the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA86JR and you mention the motor on your fan, you most likely need to replace the cover with the MaxxAir FanMate Rain Cover - Smoke #MA00-955003 so…

view full answer...

Answer 4

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 5

The MaxxAir FanMate vent cover Item #MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item #MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II…

view full answer...

Answer 6

The best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part #MA00-955002 for black, part #MA00-955003 for smoke, or part #MA00-955001 for white. The reason for this is because they have the…

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 8

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 9

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

MaxxAir FanMate Vent Cover For 2023 Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching