Parts Needed To Replace Curt Q16 5TH Wheel Hitch With Larger Curt 25K and 30K 5TH Wheel Hitches

Question

Question:

I have a Q16 rated for 16,000 lbs. I want to replace it with a Q30 or Q25. Do I need to change out my frame mounts and bed mounts ?

asked by: Thomas H

0

Expert Reply:

If you have the Curt Fifth Wheel Base Rails in either the Gloss Black # C16104 or Carbide Black # C16204 those are only capable of supporting up to 25,000lbs. This would allow you to switch from the Q16 # C16120 to the Curt Q25 # C16265. Otherwise you will need to change to the Dark Gray Rails # C99JR and under bed mounts to use the larger 30,000LB Curt A30 # C66HR or PowerRide # C22ER 5th wheel hitches. Curt does not currently manufacturer a Q30 5th wheel hitch. If you can let me know your trucks year, make and model I can let you know what underbed brackets you will also need for the 30,000lb 5th wheel hitches.

expert reply by: Bud M

0

Answer 1

I may have a solution for you, but it looks like you've got the a Curt Q20 sliding hitch and #C16022 adapter for your Ram OEM pucks, which won't be compatible with a Curt PowerRide 5th Wheel Trailer Hitch - Dual Jaw - 30,000 lbs #C22ER. The…

view full answer...

Answer 2

There are two ways to install a fifth wheel hitch on a pick up truck. One would be to use standard bed-mounted rails. Brackets are mounted to the truck frame with the bed rails sitting directly above. Holes are drilled down through the truck bed to…

view full answer...

Answer 3

Since you will be towing a gooseneck trailer the best option is going to be a gooseneck hitch. But if you see yourself wanting to tow a 5th wheel hitch in the future I have the perfect solution for you. For your 2015 Ram 3500 long bed I recommend…

view full answer...

Answer 4

The Furrion RV Tankless Water Heater part #FR68SR will work in an ambient temperature down to 32 degrees Fahrenheit. If you will be experiencing freezing temperatures long term then it is recommend to winterize the unit. If the temperature just drops…

view full answer...

Answer 5

The B&W Custom Installation Kit #BWRVK2605 referenced in your question is confirmed to fit your 2014 Ram 3500. This kit features industry standard, above-bed base rails that will work with most fifth-wheel hitches on the market. Based on my…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...