B and W Companion 5th Wheel Trailer Hitch Assembly Video

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

I spoke with my contact at B&W about the Companion Gooseneck-to-5th-Wheel Trailer Hitch, part #BWRVK3500. They told me that the base weighs 131 lbs, and the coupler weighs 73 lbs, for a combined weight of approximately 204 lbs. This hitch…

Yes the part numbers #BWRVK3500 and #BWRVK3500-5W are the same hitch exactly. We have them in our systems with two different part numbers based on how they show up in our fitguides. So you are totally fine.

The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 weighs approximately 125 pounds. Most of that weight is the base. I have included a link to a video review for you.

From your pictures, it looks like you have a plastic bed liner in your 2004 Ford F-350. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 requires that the hitch have direct contact with the truck bed and cannot be installed on…

If you already have the hitch part of the Bulldog gooseneck hitch but need the installation kit for your 1998 Dodge Ram 3500 use #4439. This is the installation rails and hardware so the only thing it needs is the hitch head part.

To answer your initial question, the base is 22" square, so the measurement from the ball center to the back edge nearest the cab is 11-1/2 inches. Additional, the flat metal at the back of the hitch nearest the cab is 2-3/4 inches wide. I have…

If the sewer line you have is a 3 inch sewer line that slips into the both sides of the valve you have now the part #34466N4BB72GM will fit and work well. You will need to use ABS solvent like #3447530889 to install it as well. If instead one side…

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

There is going to be a bit of movement with the kingpin inside of the locking jaws on the B&W Companion OEM 5th Wheel Trailer Hitch part #BWRVK3370 as it does need to rotate while turning but there aren't any adjustments for this. That said,…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

The location of the hitch ball hole that the B&W Companion #BWRVK3500-5W referenced in your question will mount onto will be 49-1/2 inches when measuring from the tailgate end of your truck bed up towards the cab. The actual Companion 5th-Wheel…